Every electrical installation, whether at home or workplace, is bound to experience common electrical problems every now and then. The majority of these problems have noticeable symptoms and are easily identifiable by non-technical users. Others are complex and require qualified electricians.

All electrical issues should be fixed as soon as possible before they become severe and can cause fires or accidents. While the consumer can see the symptoms, it is advisable to isolate the problem. Accomplish this by either turning off the faulty equipment or circuit and then hiring a qualified electrician. The consumer should never try to repair electrical problems unless qualified to do so.

With winter here, you will probably be decking your halls. That requires electricity in places you don’t normally need it. You will also want to add more light strands than you have outlets for. What do you do? You pull out the extension cords and get busy. However, extension cords are not always safe. There are rules you should follow when it comes to using extension cords to power your decorations or that space heater by the couch. Your electrician in Beverly Hills has some helpful safety tips for you. You can call the crew at The Electric Connection to learn more.

The most important rule is to only use extension cords designed for the outdoors outside. These cords are insulated and can withstand the rain and cold. Indoor extension cords do not have the same insulation and can short out if it rains explains your Beverly Hills electrician. You can identify the cords by looking at the information printed on the cord or simply by checking to see if it is round or flat. Round cords are generally outdoor and flat are indoors.

Extension cords should not be run along high traffic areas. You don’t want them being walked on, which could damage the cord and result in a short. Do not overload the extension cords either. If you are running something big, like an inflatable, it should be the only thing plugged into the cord. Always keep in mind, extension cords are not a permanent solution. If you need more outlets, call an electrician. Beverly Hills homeowners can rely on The Electric Connection to listen to their needs and find a solution.

MyLEDLightingGuide.com’s

Each kit measures 6.8″ L x 4.9″ W x 1.5″ H and weighs about 1.5 lbs. These lights come in 100-277 (Standard) | 347-480 (High Voltage), and can be installed in environments ranging from -30°C to +45°C. Three color temperatures are available: 4000K | 4500K | 5000K (Standard). MyLEDLightingGuide stocks 5000K, but can order in 4000K or 4500K.

These retrofit kits are specifically designed for smaller fixtures that have bulbs up to 400W. Three models are available to match the right output with your application. These lights fit well into wall packs, highbays, parking lot lights, canopy lights, low bay lights, flood lights. In fact, the only limitation is the fixture itself.

2 models make up the Large Series of LED Retrofit Kits, the 150W and 200W. These lights are powerful enough to retrofit and replace Metal Halide and High Pressure Sodium bulbs all the way to 400W-750W. These lights are designed to provide more than the normal 400W retrofit replacement kits. There are times when more light is needed, and these kits were designed to provide more light than our normal retrofit kits designed to replace 400W Metal Halide

Conclusion

Save

Save

Save

Save

Save