As a facility manager or building owner, it is nearly impossible to know everything about everything in your building. But it is vital to know something about everything, and that goes for your facilities lighting system too. Whether you manage a warehouse, factory, or other industrial sized building or space, the lighting is a huge factor of many things including safety, productivity, and consistency in the work in your facility.

So while you don’t need to know every facility managers and building owners should know about there lighting system and how lighting can make all the difference in various amounts of ways.

1. Not all lights are created equal. This is an obvious one, not all lighting technologies are created the same and all output at different levels. Firstly you have lighting technologies that are less efficient than others. Such as metal halide and HPS which are 2-3 times less efficient than LED technology is. Then you also have efficiency based on a “product to product” basis. For example; while LED is the clear winner in efficiency over metal halide (and really any other lighting technology), one LED product from one company isn’t going to be the same as the next company’s LED product. This is where you really need to dig deep and find the company that offers the most efficient lighting products over all other companies.

Key takeaway? First, understand that LED is the most efficient in a general sense, but also understand that each company and product varies on its own personal efficiency and you should always do your homework before going with one LED product over another!

2. New lighting system upgrade costs can be reduced with rebates. This is only a true statement when you are buying commercially qualified lighting products that are DesignLights Consortium qualified. return on investment overtime by decreased energy costs associated with running your lights. Obviously this ROI period will vary depending on how long you run your lights per day on average, but especially in big facilities they almost always are used often and thus, provide a good and even quick payback period.

4. Create safer environments with a proper lighting system. With low quality light output, you create an unsafe environment that can cause various issues. Lighting fixtures that aren’t outputting the proper amount of light after a few years into there life is all caused reasoning to retrofit over fully replace.

Have you ever wondered about the difference between single-phase and three-phase circuits? If you currently reside in North America then you are likely accustomed to single-phase circuit power throughout your home. Although single-phase circuits are popular among residential homes and smaller commercial business buildings, some businesses may consider switching to three-phase circuits in order to reduce long-term electricity costs and improve the efficiency of their building’s electrical power supply. In order to provide you with a better understanding of the difference between single-phase and three-phase circuits, Expert Electric breaks down the difference, advantages and disadvantages of each below:

Single-phase circuits are generally used to power residential homes and smaller business buildings whereas three-phase circuits are common in large industrial buildings that require a more significant amount of electrical power. Not only does a single-phase circuit require a larger electrical current than a three-phase circuit, it is less efficient with its transferal of power. This is because its current only alternates between two wires; therefore, there is a point in the process where the electrical power in a single-phase circuit drops to zero. Since a three-phase circuit transfers the current between three wires, it is more efficient with the transferal of its electrical power and therefore never allows the power to drop to zero. This allows a three-phase circuit to provide electrical power to systems that demand more electricity.

The advantage of implementing a three-phase circuit is cost-savings. Three-phase circuits are more efficient with their transferal of electrical power; therefore, they are capable of powering much more at a lower cost. Office buildings and manufacturing plants can still operate with single-phase circuits although they would be more efficient with their power supply if they made the switch to three-phase circuits. The real difference between single-phase and three-phase circuits can be seen in large data centers and manufacturing buildings. These large facilities require more power to run their operations and will therefore witness greater efficiency and savings by making the switch.

Now that it is time to take down the holiday lights, you probably have realized how dark your yard really is without the benefit of the twinkling lights and various yard decorations. With the days very short and the nights long, you will likely want to have some outdoor lighting installed. This is something a Santa Monica electrician, like those at The Electric Connection, can help you with. Outdoor lighting isn’t just for summer. It is a useful tool year round and can provide an element of safety and security to your home as well as aesthetically appealing.

During these short winter days, it is a good idea to consider electric outdoor lighting over the solar variety. Because of the limited amount of sun available during the winter, the solar lights do not always get a full charge and are either very dim or fade out in the early hours when it is still dark outside leaving your landscaping under a cloak of darkness. The electric lights are much more reliable and give you a little more freedom in placing the lights in your landscaping.

It is best if you have the electric lights installed by an electrician. Santa Monica residents will appreciate a professional handling the wiring of the lights. This will give you peace of mind the job is done right and you won’t have to worry about electrical shorts or hazards being created when the lights are hooked into your home’s main power. One popular option many homeowners choose is the installation of a timer that will automatically turn the lights off and on at a designated time. You won’t have to worry about remembering to turn them off or on. If you are ready to dress up your landscaping this winter, give The Electric Connection a call today and schedule your landscape lighting installation.

ballast-compatible LED T8 tube for office lighting, school lighting, hospital lighting, basement lighting, and more. The energy-efficient F32T8 tube light can be used in direct-wire fixtures or to replace T8 tubes in fluorescent fixtures without removing ballasts. Designed to last 50,000 hours—5 times longer than fluorescent tubes—the LED T8 tube reduces costly repairs, disposal fees, and the need for replacements. This energy-efficient LED light uses just 18 watts of power and is comparable to a 32-watt fluorescent tube light.