It’s agreeable that we all wish for the generations in school now and to come on all levels (elementary, middle / high school, and college) to be given a better environment than we were when in school.

Specifically in this post we will be talking about the importance of efficient and more importantly study that was conducted found that an environment in which the lighting that consisted of LED at 6500 k proved to be the best lighting for test taking. Studies found that the group testing under 6500 k light scored the highest against 5000 k and 3500 k. This in it of itself shows proof that with a dynamic lighting system in place (possible with LED), we can change the lighting around to meet the needs of the classroom activities. If you want to read, 5000 k was found to be most optimal. While test taking performed best at 6500 k.

Increase in productivity. Office managers have reported that when making the conversion to LED they noticed an uptick in productivity. Now you could say it’s just a coincidence due to the fact that it’s just a “new” or switched up environment. But we think it is a great way to increase focus (proved by the previous point), which in turn allows more tasks to get down.

Helps with students Circadian Rhythm. Teen’s and young adults health are crucial to keep in check especially in their school years. LED lights mimic natural light, which allow the body to feel as if they are in real sunlight when they are in reality indoors 90% of the school day. By balancing out students circadian rhythm; you allow them to stay on track when it comes to their sleep, health, and overall functionability.

Conclusion

LED sign lighting provides years of illumination and low energy costs. sign modules that consume 50mA of power each. Required materials differ depending on sign size, module size, length of wire between modules, current draw, and lumen output.

Materials:

1. First, measure your sign. Although we recommend spacing module rows 3 inches apart, it’s ultimately up to you. If you want a brighter sign, place them closer together and vice versa for a dimmer sign. With the recommended 3-inch spacing, a 4-foot square sign would need 150 modules (15 rows of 10). Again, the quantity of modules needed  is based on many factors and can differ.

These LED sign modules are available in custom lengths of up to 20 modules per strand. Order 60 feet (4 feet x 15 rows) of stranded modules, and cut the strand after every 10 modules. Each strand can be cut to make two rows.

2. Next you’ll need to order a power supply that’s rated for the combined wattage of all sign modules. To ensure that you don’t overwork the power supply, confirm that the total wattage of your modules is at least 20 percent less than the power supply’s rated wattage.

An easy way to calculate this is to multiply the total wattage of your combined lighting by 1.2. In the 4-foot sign diagram, there are 150 modules with a current draw of 50 milliamps (mA) each. Since current draw is given in milliamps, multiply that number by voltage and move the decimal 3 places to the left to get wattage. This module consumes 50 mA and has 12 VDC operation, so it consumes 0.6 watts (50 x 12 = 600). Next, multiply 0.6 by 150 to get a combined wattage of 90 and multiply that number by 1.2 (90 x 1.2 = 108) to determine which power supply you’ll need. Since the result was 108, you will need at least a 120-watt power supply.

3. Next on the list is wire to connect all your sign module stands to the power supply. For a 4-foot sign, you’ll need 4 feet of 18-gauge two-conductor wire to serve as your main line plus enough to cover the distance between your power supply and where it will be wired into an electrical system. You’ll also need dual-channel T-tap wire splice connectors for an easy connection to your main line.

Before you begin working on your sign, turn off power to the area.

4. If there isn’t one already, drill a hole in the back of your sign as an exit point for your wire.

5. Use a tape measure or ruler to plot your row spacing. Leave space on one side of the sign for your module-to-main-line connections. Mount the sign modules using their double-sided adhesive and/or screw holes.

6. Insert the end wires of each sign module row into the T-tap splice connector, and clamp the other end of the connector onto the main line. The splice connectors eliminate the need to strip wire insulation.

7. Use double-sided foam tape to secure each T-tap splice connector to the inside of your sign.

8. Reattach your sign’s front cover.

9. Connect the main line to your power supply, wire the supply into your electrical system, and restore power to the area.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.