LED light bulbs and fixtures are the best alternatives for many reasons.

LED lights are available in several shades of white. These shades are referred to as a bulb’s correlated color temperature (National Institute of General Medical Sciences, states that, “Circadian rhythms are physical, mental and behavioral changes that follow a roughly 24-hour cycle, responding primarily to light and darkness in an organism’s environment.”

According to writes, “Several studies have documented the importance of light in reducing depression, decreasing fatigue, improving alertness, modulating circadian rhythms, and treating conditions such as hyperbilirubinemia among infants. Further, the presence of windows in the workplace and access to daylight have been linked with increased satisfaction with the work environment.” Windows are the best method of accessing daylight, but cool white LED lights along with the right color temperatures at the right times, can have the same effect on the body.

Warmer color temperatures lead to the release of melatonin, which causes drowsiness. This is appropriate during bedtime hours, but causes problems for those who need to stay awake, such as overnight nurses and doctors. Introducing natural or cool white light to hallways, operating rooms, and nurse stations can help hospital staff, especially overnight workers, feel more alert and energetic.

EPA has a list of cleanup procedures, such as having everyone leave the room, opening a doors or windows, shutting off heat and air-conditioning systems, and other specific instructions.

Fluorescent and incandescent bulbs also emit low doses of UV radiation that can damage not only facility materials but can also damage skin and eyes. According to a CBSLA.com discusses the results of another study that had similar findings. In this article, it is said that, “. . . exposure to the (fluorescent) bulbs could lead to premature aging and cancer.”

Continued UV exposure is also harmful to the eyes. A LED lights won’t flicker or emit any color spikes. Color fluctuations and flicker can cause negative effects, such as headaches and dizziness. When used for hospital lighting, LED bulbs and fixtures can improve overall health and eliminate the possibility of additional health risks posed by fluorescent and incandescent bulbs.

Seeing colors as they truly are is critical in health care environments. Inaccurate color rendering of skin or blood could lead to a misdiagnosis or failure to see signs of infection or jaundice. The spectral graph below can be helpful in understanding the advantage of high-CRI light sources. Lights with a low CRI will show fewer colors while high-CRI lights cover more of the spectrum. A light source’s ability to show more colors increases its accuracy in revealing the true colors of people, objects, and surroundings.

FreemanWhite, a health-care-focused design firm reports, “. . .light fixtures with a high CRI . . .  help caregivers assess rashes, lesions, and skin pigmentation.” They go on to say, “In the interest of avoiding liability claims, better lighting quality can enhance a caregiver’s ability to diagnose correctly, identify reactions, prevent secondary infections, and minimize readmissions.” High-CRI LED lights can also help prevent medication errors.

Another method of LED hospital lighting control is the use of occupancy sensors. These sensors will save money beyond those that result from reduced energy consumption. Sensors will also extend the life span of bulbs and fixtures even further by turning them off when no one is in the area. These sensors are best suited for low-traffic areas.

Choosing the right size depends on the level of energy independence that a renewable energy owner wants. It may simply boil down to what you can afford. These levels range from 100 percent or completely off the grid (the most costly), to a simple energy backup for emergencies.

100% energy independence or completely off the grid: this requires a huge investment in terms of generation and storage. In addition, it may require other power sources such as fossil fuels or wind generators.

High energy independence: This requires a solar system with enough batteries to last a few days or even through the winter. PV systems are sized to enable the owner to have surplus energy to store during summer and be self-sufficient through winter without relying too much on the grid. The customer will still rely on the grid for backup just in case there are prolonged days of bad weather.

Summertime independence: Customer installs just enough panels and storage capacity to get through a normal summer day but will have to draw power from the grid during the winter.

Peak time independence: Battery size should be large enough to supply power during peak times when electricity rates are highest.

Reduced reliance on the grid during peak times: Some customers cannot afford to install enough storage to cover their entire peak time usage. In such a case, some will install a system that will enable them to at least reduce part of their grid usage during these times.

Emergency power backup: This requires smaller energy storage, enough to cover a short power outage. Some customers use this together with fuel generators. Battery storage is only required for the short duration from the time grid power goes out, to when the alternative power becomes available.

Even though a solar energy system is a great investment that reduces your electricity bills, it is not possible to completely get off the grid without investing in large storage systems. However, adding modest battery storage to a grid connected to solar systems is a better way of increasing your independence from the grid without spending too much.

Most marketers have online tools that can help you get the right size battery based on various factors. However, it is advisable to consult professionals for the best advice.

Customers with solar systems are increasingly adding battery storage to reduce their electricity costs or become independent from the grid. With better technology and prices getting lower every day, battery storage is becoming an appealing component to many solar power system owners.

This type of storage allows the customer to charge their batteries during the day and then discharge them when there is no generation. This permits homeowners and businesses to have a backup power source and save on electricity bills. In addition, you can sail through cloudy periods or other times when power generation is low.

Are you still using incandescent light bulbs? Your electrician would recommend a different course. Efficient lighting technology has blown up in the last few years, and advanced technologies are just getting better. Light emitting diodes, or LEDs, are at the forefront of modern lighting thanks to their inexpensive and long-lasting luminescence. Some of these new diodes are leading the pack in must-have lighting features, including smart home integration that you can control with your phone. Read on to learn more about the latest in LED technology.

Upfront Costs are Dropping

One of the biggest complaints about early LEDs was the price. Almost any LED will save you money over time compared to an incandescent bulb, since they use 25 to 80 percent less electricity and can last up to 25 times as long, but many consumers balked at paying the $35 or higher retail price for a single bulb. Newer models, however, can recreate the look of that classic 60 watt incandescent bulb with fewer LED panels, meaning they are cheaper to produce and sell for $10 or less.

Options are Expanding

Other common complaints about the first LED models were that the warmth of the light wasn't quite right and they didn't work with accessories like dimmers. With today's technologies, however, you can find LEDs that give off almost any color and lighting profile, allowing you to mimic the look and feel of your old incandescent bulbs or tailor your room to fit more eclectic tastes. Not every LED is compatible with standard dimmers yet, but many are – just check the label on the box to make sure.

Make it a Smart Bulb

Many new LED models are designed specifically to work with smart technology. That means you can control them from your phone no matter where you are, set up a schedule for them to turn on and off, and even have different colors or light intensities at different times. Newer bulbs are also optimized to work with your other smart home systems to move you closer to a goal of integrated whole-house control.

Turnkey Functionality

One of the biggest advantages of upgrading to LEDs is how easy it is. There's no need to hire an electrician to set up new wiring or fixtures – the bulbs screw right into the pre-existing bases, out of the box. If you want tips on how to make the most of your new lighting options and create the room profile that fits your home, however, don't hesitate to call up your local electrician for guidance and advice.