Although it is an option that many homeowners choose, installing solar panels on your own can be a very time-consuming and difficult process, especially if you have never worked with solar energy before. While most panels or solar kits are not terribly difficult to connect and get working, there are many factors that can help ensure that your panels last while providing you with the maximum amount of solar energy. That being said, most areas have any number of solar installers available and ready to install your solar panels for you so that you do not need to worry about any of these issues.

For most homeowners, the largest barrier to solar panel installation is the price. Although prices have gone down a little over the last few years, buying solar panels outright can be very expensive. Even though you will typically recover your investment in just a few years, it can be very difficult for many to spend that type of money up front. Luckily, there are a variety of programs available across the country that are helping to make the amount that solar panels cost much more manageable for the average family.

Naturally, it highly benefits the solar industry to have as many panels as possible on as many roofs as possible. In order to make solar installation easier for a wider number of people, many companies have developed solar financing and solar leasing programs that can help to spread the cost over a number of months. In the case of solar leasing, you simply pay the leasing company a monthly fee. In most cases, the amount that you save on your electric bill will completely offset the cost of the lease. What this means for you is that almost anyone can install solar panels without incurring a large, unmanageable up-front cost. For more Solar Power Info, browse the resources that we have available on this website.

Most of us will not be leaders with the ability to speak and the bravery to act as Martin Luther King, Jr., but we can change the world for the better in small ways.  Even one bulb at a time…

The world of illumination is changing quickly and advancing into a new frontier with light sources that are more durable, more energy-efficient and better for the natural environment.  While we still have a choice, future lighting installations with LED (light emitting diode) lamps will provide the best light for your home or office space.

To make the best choice, there are a few lighting facts you should know.  All LEDs are not created equal, so read on to educate yourself and make a change to LED with confidence.

Learn what light sources are available and the limitations and benefits of each light source, so that you may choose the best one for each application.

•The right lighting will always help you look better, feel better and perform to the best of your ability.

•The right lighting will always be energy-efficient.

•The right lighting will always work well with the natural environment, making the most of sunlight streaming in during the day and delivering illumination in the most eco-friendly manner.

•The right lighting will last.  Choose good quality bulbs and light fixtures that are guaranteed to provide excellent illumination, equipped with fine finishes and components that are durable.

1.  KNOW YOUR BRIGHTNESS LEVELS IN LUMENS

New bulb cartons are required to prominently display the brightness level (measured in lumens (lm)).  In the past we have determined bulb brightness in terms of energy consumption in watts (W), but now we must learn to think in lumens (lm).  Here is a quick conversion chart to help get you started:

Lumens            Old Incandescent                                             LED

2600 lm————→150W——————————–→25-28 W

1600 lm———— →100W——————————–→16-20 W

1100 lm————→75W———————————-→9-13 W

800 lm————-→60W———————————-→8-12 W

450 lm————-→40W———————————-→6-9 W

2.  CHECK OUT COLOR QUALITY:   Correlated Color Temperature (CCT) and Color Rendering Index (CRI))

•CCT is measured in Kelvin’s (K) and is an important factor determining the quality of light for your specific application: Warm White or Soft White is about  2700-3500 Kelvin’s (K) and Bright White light is about 4000 K+

•CRI is measured on a scale of 0-100 and is an important measure of the degree to which your light source will show the true colors of all that is being illuminated.  Color rendering for decorative indoor lighting applications should be between 85-100.

3.  FACTOR IN DIMMING CAPABILITY

Most dimmers work by reducing the amount of electricity sent to the bulb.  But with LED the correlation between brightness and energy consumption is much different than with incandescent illumination.

Because of this difference, LEDs are not always compatible with traditional dimmer switches.  You either have to replace your switch with one that is compatible with LED or look for replacement LED bulbs that are compatible with standard incandescent dimmers.

4.  FIND SUITABLE BULB-TO-LIGHT FIXTURE MATCH-UPS

The reflector and fixture type will play a significant role in determining the light output from the light source (bulb).  Look at colored lenses and fitters, as well as shades and shielding to determine how they will help steer and direct your desired level of illumination.

When looking to replace an incandescent bulb with an LED bulb in a lighting fixture where the bulb will be totally enclosed, be sure to check that your LED is specifically made for an enclosed or recessed light fixture.  LED bulbs run cooler than others, but they do produce heat. To protect the quality of the LED chip and the performance of your LED light source, LED fixtures are specifically engineered to provide adequate heat-sinking.

5.  BEWARE OF THE LOWEST “BINNER” and COMPARE PRICE VS. QUALITY

“Binning” is the process by which LED chips are sorted.

Prior to being marketed in fixtures or light bulbs, LED chips are sorted into bins according to their light output (lumen output) and color temperature.  There are clear standards set to measure the lumen output of each LED chip.  LEDs chosen from bins with higher lumen output are of better quality.

Color temperature is determined by matching up each LED according to a chromatic line grid for a specific color temperature.   LEDs chosen from larger bins contain more color variation and are not as bright.

Due to the process of “binning,” LED chips vary in their quality—especially in relation to their lumen output and color, so it is important to purchase LED light bulbs and LED light fixtures from a reputable dealer.

Philips medium base LED

Philips LED reflector, perfect for landscape and outdoor lighting applications

Dimmable LED from Philips

Kolour One LED bulb offers full 180 degree illumination

Look for all new LED bulbs from Philips, Kolour One, Satco and Bulbrite, now available at 1800lighting.com

A new thing we will be doing every here every month on the MyLEDLightingGuide’s official blog is curating things from all around the web relating to the LED lighting industry. Here are the types of articles and pieces of content that will often be featured on our monthly link roundup:

This post will be covering all of the happenings from the past month, September of 2016. We also plan to give a brief summary of each piece we include, just to get a better idea of what it’s about, who it’s for, and why it might be valuable for you to take a look at.

Without further ado, here is the first addition of A Month in The LED Lighting Industry Link Roundup…

High Bay Luminare and Lamp Market Expected to Reach $20.4 Billion by 2024

For anyone involved in the lighting industry, even remotely, this is great news to hear. As LED products become cheaper and cheaper overall, the resistance from facility managers to make the investment in LED fixtures is reducing. This trend seems to be growing, and there is seemingly only a positive future in LED; especially in the commercial lighting world.

As LED Streetlights Spread, Some Critics Look for Dimmer Switch

While some concerns relating to the light that LEDs give off is bad for street lighting scenarios, cities are still picking up the technology for obvious reasons (from cost reduction to higher quality lighting). On the contrary, critics are looking for these LED street fixtures to be dimmed down a bit, all for some fairly valid reasons that you will discover in this piece of content.

How LED Lights Influence the Bats Activity

To finish off this seemingly street light themed roundup, this post discusses the influence LED lights are having on bat activity. Is this a way for those with bat issues to deal with it or not? In short; they will reduce some issues you may have with bats and related night time animals. But check this one out to get a better understanding on how it may help.

Interesting Reads:

Here are some not-so-relevant but still relevant articles that we think are highly interesting and definitely worth the read.

First Pro Basketball Game Held on LED Court in Japan

Although the beautiful spring weather is giving you a nice break on your electric bill, it is always important you learn more ways to cut down your energy usage. This summer is going to be a hot one. You need to get ahead of the game by learning some useful tips and tricks for staying cool this summer without turning your thermostat down and running up your electric bill. An electrician in Los Angeles has those tips for you. If you need any more questions answered, the team at The Electric Connection can certainly help you.

Check out the following 5 ways you can reduce your electric bill and stay cool this summer.

1-If you haven’t done so already, switch out your old incandescent bulbs to the more energy efficient LEDs or CFLs. Your lighting needs account for about 20 percent of your electric bill. By changing out those old bulbs, you could save quite a bit of money. If you have an old light fixture, considering having it changed out by an electrician. Los Angeles residents will soon see it was worth the investment.

2-Invest in some heavy curtains or consider having your south-facing windows tinted. This can cut down on the heat produced by the sun hitting the glass.

3-Have a ceiling fan installed by a Los Angeles electrician to help reduce cooling costs. A fan in the main living area and in each bedroom can help keep you cool without running up your electric bill.

4-Use a crockpot to cook meals on really hot days. This will reduce the heat generated by the oven or stove.

5-Do not use your dryer during the day. Consider drying clothes outside or run the dryer in the early mornings and late evenings.

If you need a new ceiling fan installed or have any additional questions, give the team at The Electric Connection a call today.