We’re excited to announce the addition of six new off-road LED light bars to our SBL series product line. The 12″, 30″, 50″ light bars are equipped with two rows of powerful LEDs that emit anywhere from 1,100 to 10,000 lumens depending on the length of the bar.  These heavy-duty light bars can be used for many applications, including off-road driving lights, daytime running lights, or fog lights on trucks, ATVs, or UTVs as well as for work lighting, industrial lighting, marine lighting, and tractor lighting.

LEDs in these light bars emit either a wide flood beam or a combination spot/flood beam pattern for focusing on long- and short-range distances simultaneously.

Are you dealing with frequently flickering lights? Do your circuit breakers trip often when you turn on large appliances? Does your home have several two-pronged outlets that do not accommodate today’s three-pronged plugs for most electrical appliances? If you answered yes to any of these questions, your home more than likely needs a heavy up, which is an increase in the power of your main electrical service. For example, we can transition your home from lower amperage to either 200 or 400 amps.

Homes without Ground Fault Interrupter (GFI) outlets in the bathrooms, kitchens, or garages also need to be upgraded. This is a type of outlet that protects against electrical shocks. GFI outlets are required in most states, and homeowners in MD, VA, and DC should change all older version outlets to GFI outlets. A GFI outlet has two buttons, including a test button and a reset button, and the outlets turns the power off before a shock can occur. It is especially important that GFI outlets are installed in any area of your home where water flows—bathrooms, kitchens, outdoor areas. The outlet will sense when there is a potentially dangerous imbalance in the flow of electricity from the outlet to whatever is plugged and will shut off to prevent shocks or electrocution.

Many older homes in the area were constructed with aluminum wiring. When these homes were built, aluminum wiring was considered safe to use and viewed as a cost-saving measure. The U.S. Consumer Product Safety Commission (CPSC) now believes aluminum wiring poses a safety hazard in homes that still have this type of wiring.

The biggest danger associated with aluminum wiring is that unanticipated fire hazards arise from the rusting and deterioration caused at the points where aluminum wiring is connected at outlets, light fixtures, and splices. Call us so an expert electrician can evaluate whether or not this is a problem in your home and take steps to transition your home from aluminum to copper wiring.

If you live in an older MD, VA, or DC home, contact Kolb Electric today. We strongly recommend that you avoid attempting any electrical upgrades or repairs on your own as this can be very dangerous. Electrical upgrades are best left to a professional, licensed electrician.

Tired of breaking the bank just to keep up with the Joneses? Forget fancy cars and other status symbols. How about a way to maintain a friendly neighborly competition that actually involves saving money instead of spending? Americans have a wealth of resources at their disposal to empower families to cut back on energy consumption and reduce their electricity bills, but we don't do a stellar job of taking advantage of that information. Recent research, however, has shown that homeowners are more likely to take efficiency measures with their electrical work when they can compare their own consumption to that of their neighbors.

Whose Bill is the Lowest?

The experiment took place last summer, when the Vermont utility company Green Mountain Power worked with Opower, a software company that specializes in behavioral economics. During very hot days when air conditioning use was expected to be high, the utility reached out to customers with tips on reducing the amount of energy they need to power their home electrical work.

Afterward, the utility gave a report which ranked households in the neighborhood based on how well they had done on cutting back. By the end of the summer, electricity consumption among Green Mountain customers had dropped by five percent during hot days. That's some serious savings!

Peer Pressure at its Best

That five percent resulted from simple behavioral changes like bumping the thermostat up a few degrees and using curtains to block out sunlight during the hottest part of the day – no major investments or new equipment needed, just a little peer pressure. This research should be useful in helping understand what motivates people to save energy in order to develop more effective outreach programs for utility companies around the country.

One of the big takeaways is that the utility didn't give its customers any kind of incentives or payments to change their behavior – just the money they saved through efficiency, and the bragging rights of being more conservation-minded than their neighbors.

"Some of the decisions we make are not entirely rational, and they are due to a lack of context," Kevin Hamilton, Opower's vice president of marketing, said to Utility Drive, "and by providing that context you can encourage individuals to adjust their usage in ways that can benefit both the customer and the utility as well."

Little Changes Mean Big Savings

People come up with all kinds of reasons not to implement efficiency measures: It costs too much in initial capital, they are too busy to think about it, or they simply don't think the savings are worthwhile. But the reality is that even making small behavioral changes can add up in the long run.

If you want to decrease the cost of your electrical work and impress your neighbors, have a qualified home services technician perform an energy audit on your house to identify the most cost-effective ways for you to cut back.