The lighting of your kitchen plays an absolutely critical role in how your design will marry together, as well as make a very noticeable impact on the functionality of your space.

Many homeowners put off or ignore lighting in the kitchen, and neglect to plan accordingly. This can only end in tears! What is the benefit of those gorgeous mahogany cabinets, and that handsome granite counter top if no one can see them properly?

Don’t find yourself regretting your kitchen design decisions. Take lighting into account right off the bat! But how do you plan for your kitchen lighting? There are a few types of light to consider, and it all comes down to how you want your kitchen presented, and more importantly, how you want it used. Consider these lighting types for your perfect kitchen design.

For the sake of giving off the best lighting possible for visual appeal, consider these:

Task lighting is used to provide ample illumination for performing specific tasks (thus: task lighting), and should be installed with a specific purpose in mind. This could be for your stove top, a cutting and preparing area, or a space devoted to work or play. Task lighting is best used when it provides ample, glare-free lighting. These fixtures work particularly well:

Whether you need to install new lights in Alexandria, Annapolis, or anywhere in between, you can rely on Kolb Electric’s licensed electricians for a job done right. We’ve been helping DC home and building owners like you with all their electrical needs since 1925 and are ready to help you next!

Whether you’re doing industrial wiring or residential wiring for electricity, you’ve got a complex task ahead of you. Needless to say, industrial wiring is essentially a much more complex form of residential wiring. This article will assume that you have some elemental electrical wiring knowledge or aptitude, and it will simply provide you with a very basic overview of what you need to understand with regard to residential wiring and industrial wiring.

It will be up to you to look up your local building and electrical codes for your home or office space. Also, check your local laws to see if you are even permitted to do your own amateur wiring before you proceed. Above all things, approach any wiring project with this knowledge at the forefront of your mind: “electricity can be deadly.” Put your safety ahead of all other concerns.

Red wires and black wires are usually “hot”. This means that there is a current (amps) flowing from the circuit breaker to the electrical box or the appliance in question.

The white wires usually are “returns”. This means that they allow current (amps) to flow back to the circuit breaker after the electricity has passed through the load or appliance in question.

White wires should not be connected together with ground wires, with the exception being back at the circuit panel bus bar. If you fail to observe this rule, then every single time the load is energized (such as turning on an appliance), electricity will flow through the ground wire and the return wire simultaneously. This is very dangerous.

A ground wire is usually bare and attaches to an appliance’s frame. Under normal circumstances, current should not be passing through it. Only when there is a short circuit should electricity pass through the ground wire; this happens so that the circuit breaker will kill the flow of current to the site or appliance.

Smart industrial wiring is based on 3-phase electrical power. 3-phase electric allows less workload to be placed on each wire involved while at once allowing them to work together to give you maximum results. With 3-phase electric, the wires are smaller and the motor is smaller than a typical single-phase motor. These factors allow greater efficiency and longer lasting motors and wires.

There are four types of 3-phase electrical power:

No matter which type of 3-phase electrical power you choose to use, you’ll need a voltage meter in order to determine the actual voltages that are available to you. The type does not determine this.

Industrial wiring typically runs through metal conduits, armored cable, or a raceway. These enclosures are the safety ground–never the neutral wire.

The above information should give you a nice guidepost for doing more research into and getting more practice with either residential wiring or industrial wiring. Again, safety comes first!

You Can Be Liable for Unlicensed Electrical Work

07/30/15

Revamping your home's electrical work can be a big headache. You need to find a qualified electrician and write what could be a hefty check for work that might require opening holes in your walls and temporarily making a mess of your home. The last thing you want after a big electrical project is to have to tear it all out and redo the job all over again. That could be the scenario you face, however, if you cut corners and don't hire a licensed electrician to take on the task. Fly-by-night contractors might be cheaper at the outset, but they can cost you big time in the end if they don't follow the local building code, leaving you liable for the faults in your home wiring.

Fanning the Building Code Fires

Some contractors might complain about having to follow local code, but it's in place for a reason – it helps ensure that any work done on your home is performed safely and effectively. Local code standards are particularly important when it comes to electrical work, because faulty wiring and connections can lead to short circuits or even an electrical fire, putting your family at risk.

That's why technicians who do electrical work are required to maintain a license, secure permits and schedule inspections for many home projects. Unfortunately, there are electricians who are tempted to skip the code requirements in order to avoid the time and expense of compliance. They might quote you a lower price, but shoddy workmanship can leave you on the hook for a lot more money overall.

Limit Your Exposure to Liability

If your local government figures out that you are working on an electrical project, they can send an inspector to check it out. If the work isn't up to code, you'll have to remedy the problem before you pass inspection. And if your electrician isn't licensed, you have little recourse to correct the faulty electrical work besides paying out of pocket for someone else to redo the entire thing. Worse, if your electrical system does cause a fire that leads to injury or death, you could be civilly liable for huge sums.

Licensed electricians, on the other hand, have more incentive to follow the rules to begin with, since they could lose their certification if they don't. Furthermore, you may have an easier time recouping your investment in the event of unsafe or incomplete work if you can prove that you did your due diligence and hired a licensed electrician.

Good Work Done Right

To avoid code and permitting issues, hire only licensed technicians for your electrical work and ask them to show you all the relevant permits. Protect yourself and your home by holding out for competent contractors so you know the work is done right the first time.