The times, they are a-changin'. President Obama recently announced the details of his highly anticipated Clean Power Plan, a measure aimed at reducing the country's harmful fossil fuel emissions and limiting our contribution to climate change. The plan, when fully implemented, should reduce carbon emissions by 32 percent below 2005 levels by 2030. Read on to learn more about the Clean Power Plan and what it means for you.

Lower Prices at the Meter

The Clean Power Plan was developed by the Environmental Protection Agency, under the authority granted by the Clean Air Act. It imposes sharp limits on the types of energy production that power the nation's electrical work, but grants flexibility to states in how they act to meet those limits. In general, the plan encourages a shift away from burning coal during energy generation, while states have the option of upping their renewable energy production, using nuclear energy, increasing their efficiency or relying more on natural gas.

The good news for homeowners is that the plan is projected to decrease the bills you pay to power your residential electrical work. An analysis by the Natural Resources Defense Council found that the average home electricity bill could fall by as much as 8 percent, and consumers could save up to $37.4 billion overall in electricity by 2020. The rationale for the savings is that renewable fuel sources cost less to run over time once the initial infrastructure is in place. Also, the plan encourages investments in household energy efficiency, which means that you may come to be less reliant on your home electrical work without substantially changing your behavior.

Clean Air for Breathing

The Clean Power Plan has another ancillary effect that has nothing to do with electrical work: it should cut down on air pollution and create a healthier breathing environment. For example, while we rely on the ozone level high in the sky to block harmful sun rays, ozone at ground level is known by another name – smog. It is created when sunlight interacts with pollutants and can be very harmful to our health. The plan should reduce smog levels and provide us with cleaner air to breathe.

Furthermore, one of the biggest signs of climate change is unusually hot and dry weather in certain parts of the country, which can lead to out-of-control wildfires and harmful particulates that damage your lungs. Strange weather patterns have also been blamed for an increase in allergies this year. By slowing the pace of climate change and keeping harmful pollutants out of the air, the Clean Power Plan can help you breathe easy.

If you have any concerns about the effect the Clean Power Plan will have on your energy prices or electrical work, call a knowledgeable electrician today.

The outdoor spaces on your property become the perfect spots to spend leisurely moments with your family and entertain friends. In fact, if these areas are planned and installed well, they become an extension of your home. Well-designed spaces allow you to use these areas comfortably during the daytime; however, the only way you would be able to use them optimally after dark, is if you get the right kind of outdoor lighting fixtures installed in your landscaping.

Many homeowners feel that installing a few floodlights in different spots on the property is sufficient in terms of outdoor lighting. However, this kind of illumination is never enough. In fact, there are times when floodlights can mar the beauty of your home and its immediate surroundings; they may end up highlighting some of the unflattering features of your property as well.

The one way to overcome this problem is to hire the services of expert outdoor lighting electricians to handle the job for you. They will understand what your specific requirements and preferences are and will survey the outdoor areas on your property. They will also identify which features you want to highlight and which you prefer to keep in the background. Once they have all this information, they will provide outdoor lighting options and quotes.

A good and knowledgeable electrician will always focus on providing low-maintenance, energy-efficient and cost-effective landscape lighting solutions. While outdoor lighting jobs are typically a part and parcel of landscaping jobs, many homeowners feel the need to upgrade their existing lighting installations to modern energy-efficient LED lights.

Since there are a number of technicalities and aspects that have to be taken into consideration while planning outdoor lighting, it’s important that you consult an expert outdoor electrician who will provide you all the information you need; this helps you make a more well-informed decision.

It’s also a good idea to opt for outdoor lighting maintenance plans. As part of these plans the electricians will come over to your property and inspect all the outdoor lighting installations and fixtures. They will check whether there is any wear & tear in the electrical wiring insulation, the grounding and all the fixtures too.

Regardless of how you look at it, the right kind of outdoor illumination provides a number of benefits. It enhances the security aspect of your property AND adds to its aesthetics. When you have a well-lit garden and yard, you are more encouraged to use these spaces and this increases your return on investment.

For more information, simply speak with the experts at AllRound Electrical and take their advice on various aspects of electrical installations in your home. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

LED foyer fixture from Artcraft

Saving on energy costs and outfitting your home or office environment with new lamps and light fixtures should be at the top of your home improvement project list.  Not only do new light sources deliver a superb quality of light, they are the key components in decorative and energy-efficient lighting design.

It is an exciting time in the lighting industry.  New products are being developed every day, and LED (light emitting diode) and SSL (solid-state lighting)*  lamps and light fixtures are at the core of future illumination.

What’s more, the integration of LEDs into building and electronic communication systems is bringing everything together and enabling total control with the ease of a smart phone!

Here are some guidelines to help you answer those questions and invest wisely toward one of the greatest home improvement projects of the decade:

WHAT YOUR LIGHTING DESIGN CAN AND SHOULD DO FOR YOU…

In addition to providing optimum levels of brightness, good lighting design must also…

•Eliminate glare

•Increase comfort

•Provide continuity

•Deliver good color rendering

•Allow for adjustability

•Instantaneously make you ”feel good” with an inviting luminous appeal

Because LED lamps require so little energy to provide a great deal of illumination, the energy consumed by the bulb will not be your main concern; your main concern will be getting the desired level of brightness and light appearance.

*NOTE:  LEDs, also referred to as SSL, provide the most energy-efficient and durable illumination because they are composed of “solid state” semiconductor light emitting diodes.

1.    Familiarize yourself with labels on new bulb cartons.

Brightness (in lumens)

Estimated Yearly Cost (depends on rates and use, $)

Lamp Life (based on 3 hrs/day use, rated in years)

Light Appearance (CCT)  (warm-cool, rated in degrees Kelvin (K))

Energy Used (in watts)

Color Rendering (CRI) (measured on a scale of 0-100)

BRIGHTNESS

Brightness levels are measured in lumens to give the amount of total light created by the light source.  Beyond the lumen count, “useable” light and brightness levels are also affected by fixture housings, lenses, filters and shades.  There are clear standards set to measure the lumen output of each LED chip.  ↓

LIGHT APPEARANCE  

Light appearance or correlated color temperature (CCT) helps determine the quality of illumination.  Designated on the Kelvin (K) scale, CCT for decorative interior spaces should be in the warm white (2700-3000K) range.  Sometimes lighting in the neutral white (3500-4000K) is preferred for certain areas, such as bathrooms and kitchens.

LAMP LIFE AND THE LED

Lamp life refers to how long a light source will last once it is installed and used on a daily basis in a typical application. Lamp life ratings, based on estimates from testing,  convey the time that half the bulbs in a sampling have burnt out or dimmed below fifty percent.

COLOR RENDERING AND THE LED

The color rendering index (CRI) measures the ability of a light source to bring out the true colors in décor, objects and surfaces.  Based on a scale of zero (no color rendering) to 100 (perfect color rendering),  a minimum of 80 CRI is acceptable for interior lighting applications.  A CRI of 90+ is even better.

However, because the standard CRI measurement does not always yield true results for some LED light sources, a new standard measure of color quality is in the works:  The Color Quality Scale (CQS) may soon replace CRI for a truer account of color rendering provided by the LED light source.-www.ledlightingexplained.com, Philips Solid-State Lighting, 2010

2.    Match light fixture to light source to ensure peak performance.

LEDs small size, low-temperature emissions, and focused uni-directional beam patterns make them perfect light sources for undercabinet lighting, track lighting and pendant fixtures.

LED general and flood lighting replacement bulbs are composed of clusters of diodes to provide broader beams of light.  General service LED bulbs that are multi-directional with 360-degree angle capacity are doing an excellent job of replicating the desired illumination of old incandescent bulbs. These LED  lamps include A19, PAR, BR and candelabra light sources that are providing more light with the added benefit of tremendous energy-saving, maintenance-free illumination.

Due to their long life and durability, LEDs are excellent in hard to reach places like foyer, attic and cathedral ceiling fixtures.

*Check for compatibility with all new light sources to make sure lamps, light fixtures, dimmers and automated controls are a suitable match.

3.    Compare “apples to apples”; diodes to diodes to ensure top quality.

 Many factors contribute to the quality of the LED light bulb.   Advancements in diode technology and mass production of LED light sources are bringing costs down to make these bulbs more affordable.  However, be wary of “cheaper” LED light sources.

•COB (chip on board), the diode itself is composed of a chip that largely determines  the quality of the bulb.

Prior to being marketed in appliances, fixtures or light bulbs, LEDs are sorted into bins according to their light output (lumen output) and color temperature.  Due to the process of “binning,” LED chips vary in their quality—especially in relation to their lumen output and color, so it is important to purchase LED light bulbs and LED light fixtures from a reputable dealer.

LEDs chosen from bins with higher lumen output are of better quality.  Color temperature is determined by matching up each LED according to a chromatic line grid for a specific color temperature.   LEDs chosen from larger bins contain more color variation , so they deliver an inferior quality of light.

•LPW (lumen per watt), this measurement helps to determine energy-efficiency and efficacy

•IC (integrated circuit) drivers, the quality of the LED lamp is also dependent on the type of driver installed.  LED bulbs contain “drivers” that can fail just like the ballast of a CFL (compact fluorescent). Better driver components make for a higher quality LED light source.

ENERGY STAR-ratings ensure that the LED has met stringent testing procedures.  ENERGY STAR-rated lamps clearly identify characteristics on LED light sources to guarantee that they consistently and reliably meet the desired brightness (lumens), energy-efficiency (lumens per watt), color temperature (CCT), color rendering (CRI), and dimmability requirements.

New ENERGY STAR Regulations include:

•Consistency Control:  More standardized testing methods to improve consistency.

•Dimmability Ratings:  A lamp is either dimmable or not dimmable.  If a lamp claims to be dimmable, testing is required and it must dim down to at least 20 percent.  If it is not dimmable, it must say so on the package.

•Greater Energy Conservation:  Efficiency requirements have increased for specific lamp wattages and types.

NOTE:  The Environmental Protection Agency (EPA), along with ENERGY STAR offers rebate programs as an added incentive to help you spring into action and upgrade with LED.  Check out rebate programs in your area or contact an American Lighting Association (ALA)-affiliated showroom for more details.

LED chandelier “Niagara” from Lladro

1800lighting’s Top LED Bulb Pics:

Bulbrite’s  LED  MR16 lamp

Philips medium base LED

Philips dimmable LED

Satco’s PAR38 indoor-outdoor LED lamp

Satco’s Kolour One A19 omni-directional LED lamp delivers 820 lumens and excellent color consistency.

Satco’s Ditto PAR LED lamps are available in 25- and 40-degree beam angles and either 3000K or 4000K.