Summer days are the time to be outside enjoying the sun and warmth. Kids love to play outside and take advantage of their days being free. However, in our very technological world, kids tend to be “plugged in” a lot. All those electronic toys can be great fun, but as adults know, electronics and water don’t mix. Water play is a big part of summer. It is important to teach kids some important lessons about enjoying summer days outside around electricity. A Los Angeles electrician has a few tips to help you keep your kids safe this summer. You can rely on The Electric Connection to provide you with more information should you need it.

*Trees that are near power lines should never be climbed. Parents should point out the power lines near trees and explain how a falling branch could catch a live line and cause serious injury.

*Avoid building tree houses or raised play houses around power lines.

*If you have a backyard pool, make sure the electrical outlets are far enough away from the pool that there is not an electrocution hazard. Educate the kids about bringing in the gadgets that may be plugged in. This applies to the hot tub as well.

*Ensure there are enough outlets outside for any appliances to avoid running extension cords across the patio or yard. If you need more outlets, contact an electrician. Los Angles homeowners can have additional outlets installed outside to accommodate your electrical needs.

*Discourage children from throwing anything at power lines or utility poles.

*Remind children kites should only be flown in areas that are free of power lines.

*Children should never attempt to climb utility poles.

These tips can help save lives. Always set a good example when working around electricity. If you have any questions or would like to have outdoor outlets installed, give The Electric Connection a call today.

While it’s true that there are many different ways that electrical issues affect your home and belongings, there are four basic electrical problems that DC homeowners face on a regular basis. Each of these electrical problems must be addressed in a timely manner—otherwise a dangerous situation may occur, including electrical fire and shock. Fortunately, most of these are very easy to address, diagnose, and correct, as long as they are looked into quickly by a DC Electrician.

Homeowners throughout the DC area should immediately contact us if they observe any of these common electrical problems:

Whenever there is a sudden increase or change in electrical current, it is referred to as a power surge. This can force circuits to overload, leading to lost power and additional damage. There isn’t much you can really do—your best bet is to prevent a surge from happening by using surge protection strips and having a DC electrician install a whole-house surge suppression system. Whole-house surge protection is the best first line of protection you can have to protect your home electronics and wiring from the damage caused by lightning strikes. The cost of replacing electronic equipment in an average home is $8,000, and it may be even higher for homes in DC. Whole-house surge protection in conjunction with power strip surge protection is affordable insurance against electrical surges caused by lightning strikes and other disruptions. Contact Kolb Electric for whole-house surge protection installation in DC.

If you plug too many items into a single unit, it can cause the circuit to become overloaded. While you may be tempted to use more power strips to plug in more items, this can actually cause dangerous overloading and overheating. Whenever your circuit breaker trips frequently, you should let a qualified electrician take a look.

Whenever DC homeowners try to run their own electrical wiring, it often results in what is known as redundant wiring. Homeowners should not attempt any do-it-yourself home wiring—it is very dangerous because the wiring may not be properly capped and terminated.

Whenever you have issues with intermittent power, it usually is a warning sign that serious wiring issues are present. This is often caused by loose or improperly fastened wiring, which requires the immediate attention of an expert electrician.

These are common electrical problems DC electricians are often called in to correct. If you observe any of these problems in your home, we recommend you contact us. We are a family owned and operated business that has been serving the DC area since 1925. You can count on our electricians to provide upfront pricing and high-quality service.

Older homes generally have a character quality that can’t be seen in newer houses. These homes offer great value, and renovation improvements can bring new life into them. Unfortunately often enough the electrical wiring is never inspected during these updates for years at a time. To ensure that all your hard work is going to be safe, look for these common dangers that could threaten your older home.

From the 50s to 70s many homes were built with aluminum wiring. This was used because it was cheaper and more conductive than copper wiring. Unfortunately many pitfalls were found with aluminum wiring after it was used. Overheating and cracking are common problems with aluminum wiring. If your home was built in this time period, have your wires inspected. There could be a number of hazardous points behind your walls that may cause major issues. For more information and hazard signs of aluminum wiring, read our blog article.

Knob and tube wiring was used in homes in the early 1900s and even as early as 50 years ago. It is possible that these homes still contain knob and tube wiring in them. This wiring can be dangerous as it is more likely to crack and result in electrical fires.

The dangers of these two out-dated wiring systems are that they were installed without worry and the problems were not realized until years later. The electrical wiring systems in these homes were left untouched and so did the problems that came with them. Electrical fires, are especially dangerous as the fire starts and spreads quickly and out of sight. By the time the fire is visible it is too late and the damage can be done.

Over the years homes can see additions: new rooms added onto the home, new electrical lines added, hot tubs, etc. If a licenced electrician did not perform these additions there can be a mess of wire connecting the additions to the original home. This problem comes to a head at the service panel. If it is not properly maintained the breaker will trip constantly and electrical outlets will be overloaded. This is very dangerous as the electrical panel is in charge of keeping your home safe from electrical hazards. It is very important that the electrical panel is upgraded in order to provide the correct control of electricity throughout the entire house, old and new. This also means the panel is properly labelled so it is easy to maintain if further updates are being made.

While there is nothing wrong with purchasing an older home, we recommend that a licenced electrician inspect the electrical system in order to identify potential electrical hazards. One of our expert electricians can provide you with a list of items that should be handled. This will help you have peace of mind that your family is safe in their home.

The energy consumed by a single building or business can prove to be a huge overhead cost, especially for those buildings of a much larger size.

Starting the initiative to reduce energy consumption is becoming more and more common as the benefits become more and more clear. The benefits of reducing energy consumption is often times for one major reason, and that is to reduce overhead costs. By making switches (such as those listed here), you could realize a 50% or more reduction in overall energy usage in your facility.

Sound interesting? Learn how you can do that with the tips below…

Whatever lighting technology you have right now, if it isn’t LED, then you are probably consuming more energy than you have to be when it comes to your lighting system.

By converting to LED from a technology like fluorescent, you will easily realize a 30% reduction (on average) in energy consumption from your lights. Now, if you have lights such as metal halide or HPS (often used outside or in high ceiling lights), then you could realize even greater savings (by up to 75%)! This, in and of itself, can prove to be a major way to reduce energy usage in your buildings.

facility manager is, but it’s just a fact. Think, who knows more; someone who works with all the equipment everyday or someone who overlooks said worker? Probably the former, and that’s okay! But, just remember to ask them to be on the lookout for things and get them on-board with your efforts to reducing energy in your building. It will help a lot with your efforts!

Planting save energy in your building, but they are definitely the huge players that eat up a lot of energy. By changing just these 9 things, you will be able to put your efforts to the highest reward type initiatives.

Once you’ve switched these major energy consumers, you can then work on smaller areas of your building that are inefficient, just not as much as these 9 things.

What is one thing not listed here that you find to be a huge energy consumer? Comment it down below so we are all aware of it!