We can’t understate the importance of properly-functioning main electrical panels. If this is one aspect of your electrical system you haven’t got checked recently, it’s crucial you do so without delay. When the cooler/extremely hot season rolls in, people tend to spend more time indoors and that results in higher energy usage as the HVAC systems are operated for longer periods of time. At this time, the last thing you want is a malfunction in the main electrical panel; that can prove to be a hazard for you and your family members.

Today, most homes have a large number of electrical installations and the electrical panel plays a key role in connecting and powering all of these. This means, if the latter either malfunctions or stops working altogether, that can impact all the electrical systems on your property; they may be rendered unsafe or may fail to work. When you ensure that the electrical panel is in working order, it ensures these systems are able to keep up with the electrical usage patterns on your property.

It’s not uncommon for homeowners to keep on adding electrical appliances to their home; but this isn’t something you can do unendingly. Your home’s maximum electrical output is limited, as well as determined by the electrical panel installed on your property. In simple terms this means if you are planning on making some additions/extensions to your home or are considering adding some heavy-duty electrical appliances, it’s vital that you consult a reliable local electrician before you do so.

They will inspect the system, test its output and assess whether the existing panel would be able to bear the load of the new, potential output. Even if the former is below the maximum potential output, it might be a better idea to get the main electrical panel upgraded anyway.

It will ensure you are able to enjoy an uninterrupted power supply even if you have multiple heavy load electrical appliances operating simultaneously on your premises. If you are doubtful about whether your electrical panel needs to be upgraded, contact your electrician and get their advice on what the best plan of action would be.

While having an older main electrical panel isn’t necessarily a bad thing, there are certain aspects you should watch out for, such as:

Even the semi-modern panels that have the flappable circuit-breakers are able to keep your appliances as well as your home protected from high electrical surges. When it comes to electrical systems, it’s never a good idea to compromise on the safety aspect and keeping the main electrical panel upgraded is the one way to maintain that.

If you are considering adding any extensions to your home, growing your home’s living space in any other way, are concerned about the safety of your existing electrical panel or are adding any electrical appliances or installations on your property, call us at AllRound Electrical for a consultation today.

We will discuss all your requirements in detail and ensure the work is done in an expert manner, using the best quality materials. For more information, contact our friendly team at this number – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

Lately, there has been a lot of buzz about 3D projection mapping. I first heard about it from an electronic music enthusiast who plans to acquire projection mapping software and add this extreme visual component to his live shows. But many people were introduced to projection mapping from the coverage of the Winter Olympics in Sochi this year or from the viral video of projection mapping shown below, a pre-game show on the court floor at a Cleveland Cavaliers game. Prepare to be astonished.

In our previous blog, the professionals at Electrical Gurus gave out some ways tips for increasing the safety of holiday decorations throughout the holiday season. Today, we’ll share even more ways to safely and effectively decorate your home this holiday season.

Even if the lights are unplugged when you’re hanging them (which is advised), be sure to never use nails, screws, or tacks to hang your Christmas lights; instead, opt for clips for interior and exterior applications. This will keep your wires from accidentally becoming nicked or frayed during or after the hanging process, which can get dangerous quickly.

Never use extension cords that don’t feature ground or are not rated for outdoor usage outdoors to avoid electrocution risk. Furthermore, it is especially advisable to only plug lights into GFCI outlets, especially if they are plugged into the exterior of your home. These outlets will essentially shut themselves off in the event of a short, which is crucial to avoiding safety concerns.

Always use timers for decorations and lights to prevent yourself from forgetting to turn them on or off. Lights should never be left on when nobody is home, which is why it is advisable to turn them off during daytime hours when the family is out-and-about. Timers keep your home safe by preventing power from flowing through the lights during the day, automatically activating them in the evening hours.

Large decorations, cords, and lights should all be kept well away from tripping hazards. Of special note is extension cords, which should never be allowed to cross walkways without proper coverage. Ideally, extension cords shouldn’t be run along open space in any way. If someone trips over one decoration, then odds are all attached decorations are at risk for getting dislodged or damaged.

If your home has the proper circuit breakers, there is little risk of a fire starting from overloading an outlet; that doesn’t mean it is wise to plug in numerous strands of lights into a single outlet. Spread the burden of lights and decorations across numerous breakers whenever possible to avoid taxing your electrical panel too much in certain areas. If your home is not equipped with a circuit breaker and still uses outdated fuses, please give us a call right away to talk about upgrading your panel.

We hope you’re safe this holiday season, but if you happen to overload your circuit breakers or have a concern about the lighting of your holiday decorations, be sure to give us a call right away. The electricians at Electrical Gurus want to help to keep every Des Moines family happy and healthy throughout the holiday season.

In the past several years, the technology behind our lights has grown tremendously. Although incandescent bulbs were the standard for a number of years, more energy efficient alternatives like Compact Fluorescents (CFL) and Light Emitting Diodes (LED) have become more readily available, affordable and very popular. Because people have been looking for ways to reduce their electrical bills, and lower their overall impact on the environment, LED lighting has become a particularly popular alternative as it has become easier to find. This has resulted in LED lighting companies to manufacture and distribute more LED lights than in the past.

Should You Switch?

The reasons to switch to LEDs are numerous for both homeowners and small businesses. One of the biggest draws to LED lights is its lifespan. Most LED lights will burn for somewhere around 100,000 hours. This translates into roughly 11 years. Whenever you are dealing with this type of lifespan, you will probably end up calling an electrician in Los Angeles to come change out the light fixture before you ever have to change the bulb. LEDs not only last longer, but they also use much less electricity than both incandescent and CFL bulbs. They also produce less heat, resulting in a long-lasting, low-energy, low temperature operation.

Are They Expensive?

One of the few negatives that LED bulbs have is that they have a higher up-front cost than many other options. Although they boast the longer life span, reduced energy consumption and low heat, LED lighting is still more expensive than CFL and Incandescent bulbs. For this reason, many people choose other types of bulbs over them.  Those that go with the LEDs typically find out that they will pay for themselves through reduced energy usage. As always, don’t hesitate to contact The Electric Connection with any questions about LEDs, light fixtures or any other electrical topics. We’re always glad to help.

Click here to visit our website.

When the detector senses an object across its field of view move, it triggers the lights to turn on. The lights would stay on from 1 to 20 minutes, depending on how you preset the timer. After the preset time, the detector automatically shuts the lights off unless there are further movements within its range.