The band has:

The DMB also launched the Green Music Group, a high-profile environmental coalition of musicians, industry leaders and music fans using their power to bring about widespread environmental change in the music industry. Other members of this environmentally- conscious coalition of musicians include Maroon 5, Willie Nelson and Sheryl Crow.

Hear the Band and Get in Tune!  Go Green and Sustain your Home and Community with Positive Change…

*Energy SMART tm refers to items that use less energy and conserve natural resources as compared to similar products that serve the same purpose.  Energy Smart also refers to the ways in which we consume electricity that are less costly energy-wise and generally more efficient.

** Energy Startmis a United States government program created in 1992 by the Environmental Protection Agency (EPA) for the purpose of reducing energy consumption and green house gas emissions by power plants.  This voluntary labeling program has grown worldwide to include increasingly more consumer products. ENERGY STARtm ratings are given to products that meet a set a strict regulation standards for energy-efficiency and cost-savings.

***Revere the Dark Sky: Certain municipalities throughout the United States have passed laws and ordinances requiring outdoor lighting fixtures on newly constructed homes be “Dark Sky” compliant.

Lighting plans with “dark sky compliancy” provide for an unobstructed view of the stars and planets, protect biorhythms of life and prevent light pollution.  Be sure to incorporate shielded fixtures into your outdoor lighting scheme and position fixtures to avoid glare and superfluous light from interfering with your view of the nighttime sky or shedding unwanted light toward your neighbors’ property.

Continually searching for ways to protect the natural beauty of the universe, the lighting industry and modern technology go hand in hand.  Splendid illumination and thoughtful lighting plans are essential to this quest.

Enjoy the best in outdoor and landscape lighting, as well as fabulous lighting for kitchen and bath.  Visit a Capitol Lighting showroom or shop 1800lighting.com to view outstanding green arrivals to renew your home for sustainability and a cleaner America.

LED foyer fixture from Artcraft

Saving on energy costs and outfitting your home or office environment with new lamps and light fixtures should be at the top of your home improvement project list.  Not only do new light sources deliver a superb quality of light, they are the key components in decorative and energy-efficient lighting design.

It is an exciting time in the lighting industry.  New products are being developed every day, and LED (light emitting diode) and SSL (solid-state lighting)*  lamps and light fixtures are at the core of future illumination.

What’s more, the integration of LEDs into building and electronic communication systems is bringing everything together and enabling total control with the ease of a smart phone!

Here are some guidelines to help you answer those questions and invest wisely toward one of the greatest home improvement projects of the decade:

WHAT YOUR LIGHTING DESIGN CAN AND SHOULD DO FOR YOU…

In addition to providing optimum levels of brightness, good lighting design must also…

•Eliminate glare

•Increase comfort

•Provide continuity

•Deliver good color rendering

•Allow for adjustability

•Instantaneously make you ”feel good” with an inviting luminous appeal

Because LED lamps require so little energy to provide a great deal of illumination, the energy consumed by the bulb will not be your main concern; your main concern will be getting the desired level of brightness and light appearance.

*NOTE:  LEDs, also referred to as SSL, provide the most energy-efficient and durable illumination because they are composed of “solid state” semiconductor light emitting diodes.

1.    Familiarize yourself with labels on new bulb cartons.

Brightness (in lumens)

Estimated Yearly Cost (depends on rates and use, $)

Lamp Life (based on 3 hrs/day use, rated in years)

Light Appearance (CCT)  (warm-cool, rated in degrees Kelvin (K))

Energy Used (in watts)

Color Rendering (CRI) (measured on a scale of 0-100)

BRIGHTNESS

Brightness levels are measured in lumens to give the amount of total light created by the light source.  Beyond the lumen count, “useable” light and brightness levels are also affected by fixture housings, lenses, filters and shades.  There are clear standards set to measure the lumen output of each LED chip.  ↓

LIGHT APPEARANCE  

Light appearance or correlated color temperature (CCT) helps determine the quality of illumination.  Designated on the Kelvin (K) scale, CCT for decorative interior spaces should be in the warm white (2700-3000K) range.  Sometimes lighting in the neutral white (3500-4000K) is preferred for certain areas, such as bathrooms and kitchens.

LAMP LIFE AND THE LED

Lamp life refers to how long a light source will last once it is installed and used on a daily basis in a typical application. Lamp life ratings, based on estimates from testing,  convey the time that half the bulbs in a sampling have burnt out or dimmed below fifty percent.

COLOR RENDERING AND THE LED

The color rendering index (CRI) measures the ability of a light source to bring out the true colors in décor, objects and surfaces.  Based on a scale of zero (no color rendering) to 100 (perfect color rendering),  a minimum of 80 CRI is acceptable for interior lighting applications.  A CRI of 90+ is even better.

However, because the standard CRI measurement does not always yield true results for some LED light sources, a new standard measure of color quality is in the works:  The Color Quality Scale (CQS) may soon replace CRI for a truer account of color rendering provided by the LED light source.-www.ledlightingexplained.com, Philips Solid-State Lighting, 2010

2.    Match light fixture to light source to ensure peak performance.

LEDs small size, low-temperature emissions, and focused uni-directional beam patterns make them perfect light sources for undercabinet lighting, track lighting and pendant fixtures.

LED general and flood lighting replacement bulbs are composed of clusters of diodes to provide broader beams of light.  General service LED bulbs that are multi-directional with 360-degree angle capacity are doing an excellent job of replicating the desired illumination of old incandescent bulbs. These LED  lamps include A19, PAR, BR and candelabra light sources that are providing more light with the added benefit of tremendous energy-saving, maintenance-free illumination.

Due to their long life and durability, LEDs are excellent in hard to reach places like foyer, attic and cathedral ceiling fixtures.

*Check for compatibility with all new light sources to make sure lamps, light fixtures, dimmers and automated controls are a suitable match.

3.    Compare “apples to apples”; diodes to diodes to ensure top quality.

 Many factors contribute to the quality of the LED light bulb.   Advancements in diode technology and mass production of LED light sources are bringing costs down to make these bulbs more affordable.  However, be wary of “cheaper” LED light sources.

•COB (chip on board), the diode itself is composed of a chip that largely determines  the quality of the bulb.

Prior to being marketed in appliances, fixtures or light bulbs, LEDs are sorted into bins according to their light output (lumen output) and color temperature.  Due to the process of “binning,” LED chips vary in their quality—especially in relation to their lumen output and color, so it is important to purchase LED light bulbs and LED light fixtures from a reputable dealer.

LEDs chosen from bins with higher lumen output are of better quality.  Color temperature is determined by matching up each LED according to a chromatic line grid for a specific color temperature.   LEDs chosen from larger bins contain more color variation , so they deliver an inferior quality of light.

•LPW (lumen per watt), this measurement helps to determine energy-efficiency and efficacy

•IC (integrated circuit) drivers, the quality of the LED lamp is also dependent on the type of driver installed.  LED bulbs contain “drivers” that can fail just like the ballast of a CFL (compact fluorescent). Better driver components make for a higher quality LED light source.

ENERGY STAR-ratings ensure that the LED has met stringent testing procedures.  ENERGY STAR-rated lamps clearly identify characteristics on LED light sources to guarantee that they consistently and reliably meet the desired brightness (lumens), energy-efficiency (lumens per watt), color temperature (CCT), color rendering (CRI), and dimmability requirements.

New ENERGY STAR Regulations include:

•Consistency Control:  More standardized testing methods to improve consistency.

•Dimmability Ratings:  A lamp is either dimmable or not dimmable.  If a lamp claims to be dimmable, testing is required and it must dim down to at least 20 percent.  If it is not dimmable, it must say so on the package.

•Greater Energy Conservation:  Efficiency requirements have increased for specific lamp wattages and types.

NOTE:  The Environmental Protection Agency (EPA), along with ENERGY STAR offers rebate programs as an added incentive to help you spring into action and upgrade with LED.  Check out rebate programs in your area or contact an American Lighting Association (ALA)-affiliated showroom for more details.

LED chandelier “Niagara” from Lladro

1800lighting’s Top LED Bulb Pics:

Bulbrite’s  LED  MR16 lamp

Philips medium base LED

Philips dimmable LED

Satco’s PAR38 indoor-outdoor LED lamp

Satco’s Kolour One A19 omni-directional LED lamp delivers 820 lumens and excellent color consistency.

Satco’s Ditto PAR LED lamps are available in 25- and 40-degree beam angles and either 3000K or 4000K.

If you’re dying to install your new instructions for how to install a light bar. These instructions include options for installations with or without a wire harness and for connecting to existing LED lights. Installation will vary based on the type of vehicle, existing lighting setup, and chosen wiring method, but these instructions can serve to give you a general idea of the process. Light bar mounting instructions are also available and are listed by WH-DTS10, WWH-DTD30; (ATP) WH-ATPD20, sdoptional mounting brackets; be sure not to overtighten the hardware (you will need to adjust it in step 7).

3. Route the lighting side of the wiring harness from the battery to the light in a safe, secure manner. Connect the harness to the light. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wiring harness is a safe path to follow. Some lights may not have DT or ATP connections on them, but the connectors can be added from the harness kit or purchased separately (ATP-FPT).

4. Continue to route the switch portion of the harness to the desired location of the switch. The switch may need to be unplugged from the harness to make routing of the harness easier. An optional remote-controlled switch (RS-x) are also available with different legends.

5. Connect the black (ground) wire with the large ring terminal from the harness to the negative battery terminal. Connect the red (power) wire with the large ring terminal from the harness to the positive battery terminal.

6. Secure the relay to a suitable location, and test the light to make sure the circuit works.

7. Finally, aim the light in the desired direction, and tighten all mounting hardware.

3. Connect the black ground wire of the new light to the ground wire of the old light with solder and heat shrink tubing (PSC-x). Connect the red power wire of the new light to the power wire of the old light.

4. If the new LED work light or off-road light bar has an ATP or DT connector that you wish to utilize, corresponding ATP (DT-MPT) pigtails are available.

5. Finally, aim the lights in the proper direction, and tighten all mounting hardware.

1. Find a suitable mounting location that will allow for running wires and mounting the LED light bar. Mark where your holes will be for the light bar brackets or mounting feet. Check behind drilling locations to ensure nothing will be damaged. Drill appropriate-sized holes.

2. Mount the lights with the provided hardware or with DT-MPT or RRS-SP, RRS-SPx, or RCS-RF25A) under your hood to speed up install time and avoid routing wires through your vehicle’s firewall. Route another run of red wire from the pigtail adapter (connected to the light) to the output terminal of the switch. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wire harness is a safe path to follow.

4. Be sure to double-check for all obstructions and proper clearance. Drill an appropriate sized hole for the switch, and mount it.

5. Connect your black wire to the negative battery terminal. Connect your red wire to the switch input terminal and to the positive battery terminal with an appropriate-sized fuse holder (MAF-x) installed within 18 inches of the battery. You will have to cut your section of red wire to allow for the fuse holder to be installed between the switch and battery. Connect your other run of red wire to the switch output terminal.

6. Finally, aim the lights in the proper direction and tighten all mounting hardware.

Saffron’s Drift Light is here to help. The Drift Light is like a normalAmanda Kooser reviewed the Drift Light earlier in the month. Kooser reports that during the first night, she was highly aware of the way the light was dimming, but during the next few nights, she never caught the light turning off because she was already asleep. As somone who claims to have “notorious” sleeping troubles, this would imply that the Drift Light works pretty well.

Kooser says that since you know the LED light bulb will dim over the course of 37 minutes, it’s easy to plan for the light to turn off around the time you want to fall asleep. The most compelling statement Kooser makes about the Drift Light: “There is something soothing about the world dimming around you. It’s like being a kid with an early bedtime, sensing the sun set outside your window.”

I’m interested to see if this product will become popular. Have you ever tried anything like this to improve your sleeping habits? Leave a comment, and let us know!

A home inspection covers a number of areas, not the least of which is the electrical system. ElectricMan, a trusted certified electrician.

An electrical system inspection includes looking for any aspects that make the home unsafe. A good report features the following most common items:

With all of these points checked off the list, you know you have run across a home with a sound electrical system. It’s a great feeling knowing you’re moving into a home that won’t present trouble around every corner. That’s why it’s so important to have an inspection conducted by a qualified professional before you buy.

If you have any questions about the electrical system aspects of a potential new home’s inspection report, please contact a ElectricMan website, and don’t forget to ‘like’ us on Twitter.