Fun Fact: His obsession with a chandelier led Italian astronomer, mathematician and physicist, Galileo to discover the law of pendulum motion.

While, we cannot guarantee that you will understand the laws of physics, we can guarantee that you will be captivated by the brilliance of a chandelier.

More than ever, we are experimenting with home lighting design to display our individuality, and nothing conveys unique style more than a fabulous chandelier.

Professional lighting consultants at Capitol Lighting can help you to illuminate your sense of style and find the perfect chandelier(s) to complete your decorative interior design.  A few simple laws of lighting and trusting your own good taste will get you there…

Chandelier Application and Design Tips from Capitol Lighting

Outstanding Applications:  From powder rooms to dining rooms, the chandelier enhances the appeal of your home environment. Chosen above all else for their aesthetic rewards, chandeliers also provide needed general ambient illumination.

Power in Proportion: To enjoy the full benefits of a chandelier, you must choose a fixture that is the correct size.  A chandelier that is too big will overpower; one that is too small will look out of place.  Finding the right chandelier size is easy:  Add the length and width of the room in feet, and then convert that number to inches (i.e. a room that is 12 feet by 16 feet would require a chandelier that is approximately 28 inches wide). When in doubt between available chandelier sizes, size up to achieve a more balanced presentation.

Special Considerations for Over Dining Tables:  When hanging a chandelier over a dining table, the total chandelier width should be about a foot smaller than the table width to allow approximately a 6-inch clearance for those seated around the table.

The Long and Short of It:  Over a dining table, the bottom of the chandelier should hang about 30 inches over the tabletop. The height of the fixture should measure about three inches for each foot of ceiling height, so for standard 8 foot ceilings choose a chandelier with an approximate height of 24 inches.

In a one-story foyer or in rooms with standard 8-foot ceilings, a chandelier should hang no less than 7 feet from the floor.  In a two-story foyer or in rooms with higher ceilings, the chandelier should hang approximately 8-10 feet from the floor. If your foyer fixture is to be viewed through a picture window, select a chandelier that will fill this space and center the fixture accordingly.  Note:  A two or three-tiered chandelier works best for rooms with higher ceilings.

Installation Awareness:  Be sure to employ a qualified electrician and follow National Electrical codes when installing fixtures.  It is especially important to consider the proper mounting procedures for hanging a heavier chandelier.  Usually fixtures weighing 50 pounds or more must be secured to the home’s permanent structure.

Maintaining the Glamour:  Keeping your chandelier in pristine condition requires proper cleaning and attention to specific instructions pertaining to certain finishes.  Generally, crystal and glass elements are kept clean with a basic soap and water combination.  Nonabrasive cleansers for most finishes are required.  Drying fixture components completely will help protect their luster.

Best Accessories:  Ceiling medallions, chandelier shades, decorative chain and cord covers may add to the ambience of the chandelier.  These items may be special ordered to give your chandelier a unique flair.

Imperative Additions:  Be sure to use the correct bulbs for your chandelier.  Where you have a choice between frosted or clear, choose the bulb that goes best with the fixtures finish.  Always employ dimmer controls with your chandelier.

Get High and Mighty with a Mini: The mini chandelier has become an increasingly popular lighting fixture around the home due to the versatility of its small size. Many designers are opting for mini chandeliers, rather than pendant or island lights, over long dining room tables and kitchen islands. Mini chandeliers are also gracing powder rooms and master bathrooms, as well as bedside tables.

Accent the Positive:  Although the chandelier should be the main lighting attraction, low-voltage spot lights, a matching torchiere floor lamp, +/or coordinating wall sconces make great designing additions to supplement lighting needs and complete the room’s décor.

The lighting experts at Capitol guarantee that you will captivate guests and enjoy your home to the fullest with the most illuminating fashions in home lighting and accessories.  Capitol Lighting’s lighting consultants can help you find the perfect chandelier for your home and give you tips on hanging a chandelier.

Well, it happened again. The kitchen and bath pros who make up the via www.marketwatch.com

Giant windows are great if possible. That’s a big IF, though. Sometimes, natural light isn’t an option, either because the laundry room is subterranean or otherwise windowless. Obviously, in the image below, natural light is not an option. Yet, the color temperature of the ceiling light is neutral enough to make this laundry room bearable while another, poorer lighting choice could have made this tiny laundry room annoying to visit and kind of scary.

You didn’t think I was going to avoid talking about lighting solutions just because natural light is such a great option for laundry rooms, did you? So, how should you light your laundry room? For any type of laundry room, there are some fundamental guidelines.

I’ve already suggested that you ALWAYS USE NATURAL LIGHT, when and if possible. And for your other light sources? Consider choosing lights with a Color Rendering Index (CRI) of as close to 100 as possible. A light source’s CRI is, in effect, a metric by which to compare the ability of artificial light to render color as well as the sun. 100 is the maximum CRI. Some lamps, like low-pressure sodium lamps, can actually have really low CRIs, while there are now some LED lights with CRIs of 95 – 98. If the sun isn’t shining in your laundry room, there are plenty of excellent options that closely match natural light’s ability to render color and help you keep your clothes clean and fresh as can be.

Layer your lighting.

OK, so this is the main theme in pretty much all lighting design guides. Layering your light pretty much means that you should think about general light, accent lighting, and task lighting. In the main section of a house, this might look like mini recessed ceiling lights with square bronze trim, elegant track lighting to spotlight a painting or picture, and a reading light by the chair or some under cabinet lights illuminating the bar counter. In a laundry room it might look like the image below.

Sometimes, in larger laundry rooms, you can have all three kinds of light. But, generally speaking, laundry areas are on the smaller side and are too focused on pragmatism for decorations that would benefit from accent lighting. Keep in mind that this is a generalization with exceptions galore, but, generally, the two kinds of lighting you’ll find in laundry areas are ambient overhead lighting and task lighting, and this scheme usually takes the form of a ceiling light or two and under cabinet lighting.

Creative Options.

Just a few years ago, an energy efficient LED bulb might have cost you $20 or more. But today, you may be able to get as many as six bulbs for that price, and consumers are taking notice.

LEDs were always extremely energy efficient and long lasting -- the high upfront cost was the last thing holding them back from being the obvious choice for most household lamps and fixtures. But while we waited for those prices to drop, many consumers turned to CFL bulbs -- the curly ones -- as a more affordable way to reduce their energy consumption.

Now that LEDs are so accessible, some homeowners are upgrading and wondering what to do with their collection of CFLs, some of which may have thousands of hours of light left in them.

Managing the Mercury

The primary reason why CFLs need to be handled and disposed of carefully is because each bulb contains a small amount of mercury. The mercury content is so low that you don’t need to worry excessively about health risks in the event of a broken bulb, but if thousands of CFLs pile up together in the same landfill, the combined mercury content could prove hazardous. Even in trace amounts per bulb, the risk of soil and water contamination is real.

To avoid this problem, every CFL bulb should be disposed of at a recycling facility, whether it’s broken, whole, burned out or still good.

Recycle Right

Not every recycling facility accepts CFLs. If you have curbside recycling, check the service provider’s website for information specific to CFLs. It may be that they’re able to collect and recycle these bulbs, but only if they’re packaged separately for disposal. Some facilities may require you to deliver CFLs yourself.

In addition to municipal recycling centers, CFL recycling is offered by many business, including hardware and electronics stores. If you’re looking for your nearest CFL recycling location, use Earth911’s recycling search tool.

Accidents Happen

CFLs are made of breakable glass -- a fragile barrier containing the mercury vapor within. Because of the low mercury content, you don’t need to call out the hazmat team if you accidentally break a bulb. But as a precaution, you should still treat cleanup more seriously than you would with an ordinary incandescent bulb.

If a CFL bulb breaks, immediately clear the area of people and pets. If possible, open a window or door to ventilate the room. Turn off the HVAC system so that the mercury isn’t circulated throughout the home.

When it’s time to clean up the mess, leave the vacuum behind. Like your HVAC system, it can blow the mercury vapor around your home. Instead, sweep up all the glass and bulb components into a dustpan and deposit them into a plastic bag.

Use a damp paper towel to wipe down the area, and if necessary, use sticky tape to collect small glass shards. Place all cleaning materials into the bag and seal it up. Afterward, take the bag to your nearest CFL recycling location for safe disposal.

And if you need help with more substantial lighting issues, don’t take the risk of playing with electricity alone -- call up your local, licensed electricians.

Ceiling fans are a welcome addition to any room, providing a source of light, circulation, and warm or cool air, at the flip of a switch. Depending on the type, and style of fan you choose, they can add a pleasing, visual element to your living space, but there’s more to choosing the right fan than just looks. Adequate sizing makes all the difference to performance and comfort, while proper installation methods allow for the safe and efficient operation of your ceiling fan. When it comes time to replace your existing fan, whether for technical, or aesthetic reasons, professional installation is recommended, as the warning signs and potential issues may not be immediately apparent.

Looking for an electrician in Baltimore or Bethesda, MD? Perhaps you need one in Alexandria, VA or Washington, DC. No matter where in the DC Metropolitan area you need an electrician, make sure you enlist the services of a licensed electrician. There are many benefits of hiring licensed electricians, and learning about these benefits will help you determine if this is the right course of action for you.

Licensed electricians:

When you enlist the services of a licensed electrical contractor, you can be sure that the electrician is fully knowledgeable about the complex workings of the electrical system in your home. Many people think they can learn the skills needed to do minor household electrical work, but the truth is that your home’s electrical system is more complex than you realize. Our electricians are fully licensed and have years of experience completing electrical installations and repairs in homes throughout MD, VA, and DC. They have successfully completed rigorous training, which means they have the skill set necessary to handle any electrical issue.

A licensed electrician understands all the codes and regulations in place for residential and commercial electrical work. The National Electrical Code (NEC), or NFPA 70, is a regionally adoptable standard for the safe installation of electrical wiring and equipment in the United States. Rest assured that the electricians here at Kolb Electric have a thorough understanding of NEC requirements as it pertains to circuit breaker replacement, panel upgrades, surge protection, and more.

By trusting a licensed electrical contractor to take care of your residential or commercial electrical needs, you can feel confident knowing that the electrician will have all the tools and equipment necessary to complete the job—accurately and in a timely manner. Homeowners, in most cases, simply do not have the proper tools and equipment necessary to complete electrical jobs, small or large.

There’s a reason the NEC standard has been put into place for electrical work—it functions as a critical safety measure. Hiring a licensed electrical contractor is safer than if you were to do the job yourself. Working with electricity can be very dangerous, but skilled professionals understand how to complete electrical work safely.

Kolb Electric is a full-service electrical contractor providing electrical services, including troubleshooting, circuit breaker replacement, panel upgrades, and surge protection. We also offer installation of ceiling and attic fans, outdoor lighting, light switches, dimmers, and light fixtures.

We fully support and promote the continuing education of our expert electricians. Call us or contact us online so we can handle your electrical needs—we’ll get it right the first time around.