While you may not know them by name, you’d probably recognize a GFCI outlet if you saw one. These are the outlets that not only have the outlets themselves on their face plates, but also 2 small buttons. One says test, and the other says reset. These outlets are commonly located in areas of the home where water is often present, such as in bathrooms, outlets around the kitchen sink, and any outdoor outlets on your property. Essentially, they serve as an added safety feature in your home, protecting residents therein from the threat of electric shocks.

GFCI outlets measure the voltage level as electricity passes from the “hot” to the “neutral” side during use. Should the voltage not match up, the outlet registers that electricity is escaping and traveling through something to ground itself—potentially a human user of whatever device is plugged into the outlet. When this imbalance registers, the GFCI outlet basically acts as a circuit breaker. It nearly-instantaneously stems the flow of electricity through the circuit, protecting the user from danger. The outlet will then have to be reset before being used once again.

On any job site, having the right electrical safety gear is essential. For electrical projects, there are often special considerations, as some tasks can have unique hazards that require special gear.

Eye injuries are serious and for most electricians are a daily hazard. Having, and using, the right eye protection can make all the difference.

Electricians often work at heights, either on roofs, scaffolds, or elevated work platforms. In some locations, even working on a step ladder can require fall protection gear.

When the potential exists to fall more than 6 ft., fall protection gear should be worn. This includes an approved and inspected harness and a lanyard with the correct weight rating. Always ensure that the fully extended length of the lanyard is short enough to prevent the worker from contacting the ground in the event of a fall.

Hand injuries are the most common type of workplace injury, therefore selecting and using the right kind of gloves is vital.

Along with proper knife safety practices, using cut-resistant Kevlar gloves can greatly reduce the potential for cuts and scratches. In cold weather, ensure that insulated gloves are worn. When dealing with potentially hazardous chemicals, use gloves rated to handle the specific associated hazards.

The term “light box” can mean a few different things, but from a lighting perspective it typically refers to a backlit display panel. Light boxes are most commonly used for advertisements or other commercial displays. You’ve probably seen them in trade show booths, restaurants, airports, nightclubs, offices, hotels, museum exhibits, and retail shops. That’s right, light boxes are everywhere.

One of the most common uses for light boxes is the commercial advertisement. You see these in large spaces like terminals or outdoors at bus stops. They capture the attention of passers-by and create lasting impressions. The light box pictured below is one of the biggest I’ve ever seen.

One of the most obvious places you’ll see light boxes are along the walls inside and outside of movie theaters. Sometimes lines of light boxes stretch incredible distances, advertising all the movies being shown in large theaters.

In fact, light boxes can be a fun addition to any home and can be used for as many purposes as you can imagine. Sure, you could illuminate a movie poster of your daughter’s favorite movie. But you could also make a custom sign saying whatever you want. I really like the light box below, created at home for home.

This episode of Operation Build aired nationally on the History Channel Saturday morning, April 18th at 8 am and on H2 April 25th at 7:30 am.  In case you missed it, here is the link…

See a home transformed as good lighting turns into great lighting with the latest innovation and exquisite lighting design. 

Architect/Lighting Designer Joseph A.  Rey-Barreau and Capitol Lighting President Eric Lebersfeld meet Operation Build.

Lebersfeld of Capitol Lighting and Rey-Barreau of the American Lighting Association (ALA) invite us in for an exclusive tour of one of South Florida’s luxurious estates as secrets of turning good lighting into great lighting are revealed.

Don’t miss this opportunity to get the latest lighting information and see for yourself how great lighting makes a world of difference in the look and feel of your environment.

With so many options in LED (light emitting diode) and CFL (compact fluorescent) lamps, the creative design capabilities are vast and lighting designers are implementing decorative schemes that are truly amazing.  Rey-Barreau offers the latest lighting techniques and an insider’s view of the incredible changes taking place in the lighting industry.

See more with Rey-Barreau at 1800lighting.com: