Under-Cabinet LED Lighting Kit is available for purchase that contains a plug-and-play LED light strip, push-button dimmer, remote, 12V power supply, and connection accessories. If you want to build a custom kit, follow the steps below the diagram to ensure that you get everything you need.

3. Select a dimmer or controller

For single-color LED strip light setup

Select the power supply large enough to operate the amount of LED strip light you need to use. If you want to control the brightness of your light strips, you will need a Single-color dimmer shown installed with a non-dimmable power supply

For color-changing LED strip light setup

Follow the instructions above for the single-color light strip setup. However, instead of a dimmer, use a RGB color-changing light strip installation

4. Use an LED amplifier for long runs of strip

Depending on the strip chosen and its maximum run (the number of strips that can be installed consecutively before needing amplifiers), you will need to install an light strip interconnect cables. It is best to purchase a length of strip that is more than your application requires. For example, if your project requires 8 1/2 feet of strip, we recommend purchasing 9 feet of strip to ensure that you have everything covered.

Motion sensor LED stair lights let you safely and effectively navigate your steps while eliminating the need for any action. And because they turn off automatically, they also save power! We’ve recently installed these handy little LED stair lights and wanted to share the process with you.

wire that will be needed. It is best to order more than you need so that there’s slack in the line and enough to extend to where your power supply will be mounted.

It’s important to choose the correct wire gauge for the length of wire you need and amount of current that will be flowing through it. The key is to avoid voltage drop, which happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). The longer the run of wire, the lower the gauge of wire needed.

*If you need help determining the correct wire gauge, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

3. Using wiring from the

4. Use a run of wire to join the PIR sensor at the top of your steps with the power supply. You can wire both PIR sensors to the power supply using electrical tape or with

5. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

7. Finally, connect to power.

LED stair lights and

4. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

6. Finally, plug the power supply into your wall outlet.

Smart homeowners are always looking for ways to lower their electricity bills. Not only do you save money, but you reduce your environmental footprint as well by decreasing your reliance on fossil fuels. Lowering your electricity and other utility bills can increase the value of your house and even correspond with living a happier life. There are endless tips and tricks available to help you cut back on your electricity usage, but be prudent -- there are some persistent myths out there about home electric use that won't actually help you save energy, and could end up costing you. Read on to find some common claims about electricity that simply aren't true.

Energy efficient light bulbs are too expensive: Light bulbs cost more to buy in the store than they used to, it's true. Thanks to federal regulations, traditional, cheap, incandescent bulbs have all but disappeared from the market,  replaced with options like compact fluorescent bulbs, LEDs and halogen bulbs that all have a higher price tag. However, the modern bulb options use far less electricity and have longer life spans that the incandescents of yore, meaning you will actually save money in the long run. The average household should save about $75 each year by replacing old light bulbs with newer, more efficient versions, according to the U.S. Department of Energy.

You don't need to power off your computers and other electronics when you aren't using them: Most computers, televisions and other modern electronic devices go into sleep or hibernation mode when they haven't been used for a period of time. However, hibernating is not the same as fully powering down. Leaving a computer in sleep mode still draws electricity. Furthermore, even in sleep mode, electronics experience tiny but cumulative wear and tear. Save electricity and prolong the life of your devices by shutting them off and unplugging them when you don't need to use them for several hours.

Setting the AC to frigid will cool your house down fast: Wrong. Your air conditioner cools at the same rate regardless of how hard it has to work to meet your thermostat setting. So if you turn the dial to its lowest setting, you won't cool off any faster, but you will waste electricity once the machine passes your desired temperature and keeps on trucking to cool the house even further.

Solar panels aren't an option for me: While solar panels produce best in climates with a lot of clear, sunny days, homes in cloudy or rainy regions of the country can also benefit from them. Fog and clouds block some of the sun's energy, but not all of it, so residents of famously weather-obscured cities like Seattle and San Francisco can still get good value by installing a solar array on their roofs.

To separate what's real from what's false in the world of electricity efficiency, hire an expert to conduct a home energy audit. A trusted professional can evaluate your home and appliances, show you where you can make cost-efficient upgrades and steer you away from useless or counterproductive measures.

The widespread availability and application of electricity is one of the truly greatest accomplishments mankind has ever achieved, yet we take it almost entirely for granted. Many people endlessly utilize electricity with almost no idea of how it works. The fact of the matter is that electricity is an incredibly dangerous, and even deadly force, that would be nearly impossible to harness for any practical application without grounding. We’ve probably all heard of grounding, but few people understand just how crucial proper grounding truly is to their house’s wiring.

The importance of proper grounding is so vital that it truly cannot be understated, even summarizing the necessity of grounding is difficult without thorough understanding of how electrical currents work. Still, as a basic overview, grounding provides these few necessary things to any safe electrical application, including the power routed to and through your home:

A certified & bonded residential electrician can help you with any electrical issues that may arise in your home, due to poor grounding or otherwise. For any electrical installation services, work with Des Moines’ Top Rated Local® residential electricians for safe, reliable wiring that you can count on.