If you’re dying to install your new instructions for how to install a light bar. These instructions include options for installations with or without a wire harness and for connecting to existing LED lights. Installation will vary based on the type of vehicle, existing lighting setup, and chosen wiring method, but these instructions can serve to give you a general idea of the process. Light bar mounting instructions are also available and are listed by WH-DTS10, WWH-DTD30; (ATP) WH-ATPD20, sdoptional mounting brackets; be sure not to overtighten the hardware (you will need to adjust it in step 7).

3. Route the lighting side of the wiring harness from the battery to the light in a safe, secure manner. Connect the harness to the light. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wiring harness is a safe path to follow. Some lights may not have DT or ATP connections on them, but the connectors can be added from the harness kit or purchased separately (ATP-FPT).

4. Continue to route the switch portion of the harness to the desired location of the switch. The switch may need to be unplugged from the harness to make routing of the harness easier. An optional remote-controlled switch (RS-x) are also available with different legends.

5. Connect the black (ground) wire with the large ring terminal from the harness to the negative battery terminal. Connect the red (power) wire with the large ring terminal from the harness to the positive battery terminal.

6. Secure the relay to a suitable location, and test the light to make sure the circuit works.

7. Finally, aim the light in the desired direction, and tighten all mounting hardware.

3. Connect the black ground wire of the new light to the ground wire of the old light with solder and heat shrink tubing (PSC-x). Connect the red power wire of the new light to the power wire of the old light.

4. If the new LED work light or off-road light bar has an ATP or DT connector that you wish to utilize, corresponding ATP (DT-MPT) pigtails are available.

5. Finally, aim the lights in the proper direction, and tighten all mounting hardware.

1. Find a suitable mounting location that will allow for running wires and mounting the LED light bar. Mark where your holes will be for the light bar brackets or mounting feet. Check behind drilling locations to ensure nothing will be damaged. Drill appropriate-sized holes.

2. Mount the lights with the provided hardware or with DT-MPT or RRS-SP, RRS-SPx, or RCS-RF25A) under your hood to speed up install time and avoid routing wires through your vehicle’s firewall. Route another run of red wire from the pigtail adapter (connected to the light) to the output terminal of the switch. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wire harness is a safe path to follow.

4. Be sure to double-check for all obstructions and proper clearance. Drill an appropriate sized hole for the switch, and mount it.

5. Connect your black wire to the negative battery terminal. Connect your red wire to the switch input terminal and to the positive battery terminal with an appropriate-sized fuse holder (MAF-x) installed within 18 inches of the battery. You will have to cut your section of red wire to allow for the fuse holder to be installed between the switch and battery. Connect your other run of red wire to the switch output terminal.

6. Finally, aim the lights in the proper direction and tighten all mounting hardware.

Cold weather and winter storms are often to blame for power outages. It seems like when you need your heater the most, it will be rendered useless by a power outage. The power may go out for a number of different reasons. An accident, a severe storm or mechanical failure are all possibilities. You never know what may happen. A Pasadena electrician has some tips for you to keep handy just in case the power goes out this winter. If you have any more questions, you can always call The Electric Connection.

• Unplug your small appliances, computers, Smart televisions, gaming systems and any other items that have sensitive electrical components. Leaving items plugged in could damage them when the power comes back on. A small power surge can fry the electrical components. You can reduce or eliminate this risk by having a whole home surge protector installed by an electrician. Pasadena residents can save themselves a great deal of money on damaged appliances with one of these inexpensive tools.

• Call the power company hotline to determine how long the outage is expected to last.

• Shut the doors to any rooms you are not using to keep the heat in one area. Put on extra layers of clothing to stay warm.

• Pull out flashlights and candles if the power outage happens in the evening. Emergency candles are different than the typical decorative candles and will put out more light.

• Instruct everyone in the house to leave the refrigerator and freezer doors closed. Your food will stay cold for 4 hours in the fridge and up to 24 hours in the freezer.

If the idea of dealing with a power outage does not thrill you, you could always invest in a standby generator. These handy tools will keep your home powered and allow you to continue on with your life without any interruption. Give The Electric Connection a call today to learn more.

This summer is the time to plan plenty of outdoor events including backyard barbecues. If you have been thinking about having that new outdoor kitchen installed, now is the time to do it. Being able to stay outside with your guests as you prepare a fantastic feast is a luxury you can only get when you have an outdoor kitchen. Your outdoor kitchen would not be complete without electricity and lighting. You will need an electrician in Pasadena to help fulfill your dreams of cooking outdoors with all the modern conveniences of your kitchen. The team at The Electric Connection can help you achieve that dream.

One of the most important factors of your outdoor kitchen is the lighting. Many cookouts are held in the evening hours when things are a bit cooler because the sun is setting. With the setting sun, you will have less natural light. You don’t want to burn your meal and will definitely want adequate lighting for the cook. This can be installed by a Pasadena electrician. LEDs are an excellent choice and can be installed over the grill area to ensure the cook can see clearly.

Your counters, seating area and the walkway will also need to be adequately lit. You can choose to have lights installed along the pathway or have several large fixtures installed by an electrician. Pasadena homeowners have a number of different outdoor lighting options. You can choose soft lighting for the dining area or make it fun and festive with brightly colored lantern lights hanging over the seating area. Your first step is visiting your local home improvement store to check out what you can do or give your friendly electrician a call. The team at The Electric Connection can help you come up with the perfect lighting scheme for your outdoor kitchen.