Electricity may either be connected by 230 or 240 volts (these are called single phase circuits that are installed in most residential applications), or 400 & 415 Volts (3-phase). The latter are typically best-suited to provide power to heavy-duty appliances and equipment and in industrial settings as well as larger commercial applications.

Some people have electric kilns installed in their homes or garages because they indulge in making pottery or ceramics products. Certain homes have very elaborate and large, ducted air-conditioning systems. In all these situations, a 3-phase circuit would be required to support this heavy power usage.

The type of circuit used is dependent in the equipment or appliances installed on your property. It is important that you check the power & voltage requirements of the installations properly, before deciding what type of circuits you need. In most instances, even massive ovens and high energy-consuming heaters are typically singe-phase.

This current in amps has to be multiplied by the voltage to give you the power in watts. If a 3-phase supply is available, the total voltage of 24,000 watts will be divided by 3; this means 8000 watts will be used in each phase. This means the current in each phase is lower than 1/3rd of what it generally is in a single phase power supply (about 30 amps in each phase instead of 100).

The aspect to keep in view here is that if you have a 3-phase electrical connection, you will end up paying higher connection fees for it. In addition, you would have to pay fixed annual charges for 3-phase as well, so you shouldn’t be considering it for your new home unless it’s really needed.

Depending on the locality you live in, your property may also be connected to a SWER electrical line and many country areas have them. The SWER (single wire, earth return) delivers single-phase power. It is a very economical way of power distribution since it requires only a single transmission or active line. The earth is used as the return conductor and there is no neutral line.

In case you need to use any 3-phase motors in these settings, you would have to get a single-phase to 3-phase converter installed. Choosing the right phase is crucial to the optimal working of your equipment and for the safety of your property as well.

If you’re experiencing shocks when you pull a plug out of the wall, or if you notice a spark when turning a particular electrical switch on and off, a faulty appliance or bad wiring may be to blame. Be careful to make the distinction, however, between an electrical issue and a shock that might occur after, say, crossing a carpet. The latter is caused by static and is not a serious issue.

Flickering lights are irritating, but they aren’t always cause for concern. They may just be flickering because of a faulty or loose bulb, so try swapping out the bulb in a flickering light before calling in a professional. If that doesn’t work, the wiring in your circuit breaker may need to be reworked, or there may be an issue with the connections in your light fixture.

If a bad burn-like odor emanates from the outlets and switches in your home, the first step you should take is to turn off the power from the electrical panel. The second step should involve placing a call to your electrician, who can tell you if the problem is with a particular device or a potentially serious wiring issue. Don’t ignore a burn smell – if left unassessed, it could lead to an electrical fire.

While some of these signs don’t always indicate a serious problem, others are cause for concern. When it comes to electricity, it’s always best to err on the side of caution, so if you’re experiencing any of these issues and can’t determine the cause, it is time to make a phone call.

High bay fixtures are a critical part to any high ceiling building. Since these high bays require such large lumen output, the cost to run them can be high. By converting to LED high bays, you are able to reduce your energy consumption in your most energy intensive fixtures by up to 75%.

In this post, we are going to cover (non-comparatively) 5 top types of LED high bay lights for this year, 2017. While not every item on this list will apply to you and your building, there will surely be one or two for your needs if you currently use high bay lights in your facility.

If at any time you come across a question, want more information, or are actually interested in implementing LED into your building;

These traditional commercial high bay lighting fixtures look a lot like what we think a normal high bay should look like. They are reminiscent of traditional style Metal Halide and High Pressure Sodium high bays and offer your typical round high bay look.

These high bay LED fixtures can replace both 400W and 1000W Metal Halide. The smallest unit is 80W producing 10,240 lumens. There is a 160W unit producing 19,200 lumens. This would be a good 400W Metal Halide replacement. And the largest unit at 400W produces 51,200 lumens. That’s 128 lumens/watt. And, USA Made backed with a 10 year warranty.

These LED high bay Lighting fixtures look a lot like a troffer style panel. The advantages of this type of fixture are the LEDs are spread over a larger area. This has 2 main advantages – Great light distribution and large heat sink. It is important to realize these lights are particularly good at light distribution, creating an even distribution.

These high bay LEDs can replace both 400W and 1000W Metal Halide. The smallest unit is 120W producing 15,360 lumens. There is a 150W unit producing 19,200 lumens and the largest unit at 300W produces 38,400 lumens. USA Made backed with a 10 year warranty like the traditional style high bay.

A retrofit kit utilizes your existing fixture and replaces the bulb and ballast with the LED head and the LED driver. These retrofits can be significantly more economical than replacing the entire fixture, for obvious and not-so-obvious reasons. One of which being it’s cheaper to buy. Another being it’s (typically) cheaper to install as well. For this reason, our high bay retrofit kits HAD to make it on the list of the best high bay lighting options.

Our hope is for Light Reading to be a place you can come for inspiration and guidance as you plan your next lighting project.

The thing is, we are incredibly inspired by our readers!  Your kind words, and contributions to “11 Beautiful Photos of Under Cabinet Lighting”

11 Beautiful Photos of Under Cabinet Lighting: This one definitely falls under the “inspiration” category, but it can also be helpful if you’re trying to determine what type of under cabinet lighting is your favorite for the kitchen. Puck? Linear? LED? Fluorescent? Be prepared to gaze at dreamy kitchens. “How To Have Great Lighting In a Rental”

Here’s How To Map Out Your Recessed Lights (An Infographic): Those who decide to add recessed lighting to a new or existing home are presented with a seemingly impossible task – laying them out on a blueprint. This infographic will clue you in on what every lighting designer knows about recessed lighting placement. You’ll be ready to install in no time. Read More >>