With little ones crawling around the floors, it is hard to always keep an eye on what they are doing all the time. Electrical outlets are at the perfect height for them and seem to be the most interesting thing to investigate. This convenience leads to hundreds of children suffering severe shock (electrocution) each year. This is why tamper resistant outlets are so important. If your home is missing tamper resistant outlets, it may be time to upgrade.

A tamper resistant outlet looks just like a normal outlet, to the untrained eye but have important mechanisms behind the plastic to ensure that nothing foreign can find their way into electricity. Behind the two top prong holes is a small plastic panel. This panel slides across to cover the prong holes. If a child approaches the receptacle with a key or other narrow object with the intention to insert it into the outlet, the plastic panel will prevent them. No matter how much force they apply, it will block the foreign object from entering the outlet and allowing electrical current to escape.

If this plastic panel is preventing objects from entering the prong holes, how do you plug in your normal devices then? The trick to this is that pressure must be applied equally through both prong holes in order to slide the panel to the open position. If there is uneven pressure, the panel does not move. This is how it can prevent paperclips from entering, but operates seamlessly when plugging in a lamp.

Tamper resistant outlets can prevent serious injuries to children. If you have a young one making their way around your home and you aren’t sure if you have tamper resistant receptacles, now is the best time to check. Contact your local Expert Electric at 604-681-8338. We can help to identify what kinds of outlets are used in your home, and upgrade them if needed.

“No two snowflakes are alike.” This is a statement nearly every schoolchild has heard at least once, either while crafting unique snowflakes with a sheet of folded paper and some scissors or while learning a lesson on the science of snow. While even most scientists don’t quite understand what causes a snowflake to form such complex and beautiful columns and points and branches, one thing is for certain, the composition of snowflakes guarantees that no two will ever be identical.  However, it is possible for two snowflakes to appear to be nearly exactly alike.

A snowflake begins to form when a piece of dust catches water vapor out of the air. Water is created when two hydrogen molecules attach to an oxygen molecule. The two hydrogen molecules are angled from one another in such a way that they form a hexagonal shape when they come together during the freezing process; thus, a snowflake begins as a simple hexagonal shape or as layers of hexagons called diamond dust. The emergent properties that follow from the original hexagon are what differentiate one snowflake from another, as the humidity, the temperature in the air, and many other factors (some of which remain unclear to scientists) allow each snowflake to form in an entirely unique way with a seemingly endless variety of shapes.

However, in 1988, a scientist named Nancy Knight claimed to have located two that were the same while studying snowflakes as part of an atmospheric research project. And it appeared to be so; when put under a microscope, the emergent properties looked nearly identical. But while it is feasible that two snowflakes can appear to be exactly alike on the outside, they are never identical on an atomic level. Deuterium is an atom that appears attached to about one in every 3000 hydrogen molecules in the air. Because there are millions of atoms that make up a snowflake, the random assortment of deuterium in any two snowflakes—even in two that so very closely resemble one another—simply cannot be the same.

Electronics are some of the most expensive investments in any home. So how can you be sure you’re safely protecting them from electrical surges? With a whole-home surge protector, you can rest easy that all of your electronics and appliances are protected in the event of a lightning strike or electrical surge.

A whole-home surge protector is installed in your main electrical panel in order to cut off potential electrical surges from flowing into your home’s internal wiring. Whole-home surge protectors can protect up to 40,000 amps of current flowing into your home. When an electrical surge takes place, the device detects the excess energy and safely diverts the surge through the home’s grounding path. This will protect your home from:

This provides an easy, catch-all system that ensures every plug in your home is safe from a surge. Never have to worry about plugging your expensive electronics into standard plug-in surge protectors.

According to the Insurance Institute for Business & Home Safety, the Maryland/Virginia/Washington, DC area is considered at moderate risk for lightning strikes. These, along with other powerful weather events, are strong enough to fry both large and small electronics, including:

By investing in full-home surge protectors, you save yourself the risk of potentially paying thousands to replace your expensive electronic devices and appliances. Don’t suffer later when you can prevent damage up-front!

It is important that typically, it is recommended that you double protect against electric damage by also using standard wall surge protectors. This will make sure that no matter how strong the electrical surge is that hits your home, your valuable electronics will stay safe.

Everyone from the National Fire Protection Association to the Institute for Business and Home Safety recommends the use of whole-house surge protection. Fortunately, great whole-home surge protection is available and affordable! For maximum protection, you’ll want to install a whole-home surge protector at the circuit breaker box and supplement it with smaller surge protectors on individual outlets. A whole-house surge protector can protect your home from up to 40,000 amps of current (normal household power is between 200 to 300 amps). When something like a lightning strike causes such a surge, the surge protector detects the excess current and safely diverts it through the house’s grounding path. Whole-house surge protection provides homeowners in MD, DC, and VA peace of mind when a powerful thunderstorm passes the area.

Kolbe Electric’s electrician team can easily install a top-of-the-line surge protector with ease. Our whole-house surge protectors usually come with lifetime warranties and added protections for possible losses. This means your electronics are double-protected against future loss due to electrical surge! Call Kolb Electric today to learn more about our whole-house surge suppressors for your Maryland, Washington, DC, or Virginia home.

Let’s face it—halogen and incandescent headlight bulbs are a thing of the past. fanless, driverless LED headlight bulbs were used in this installation.

If your vehicle allows for horizontal adjustments, mark the distance between your headlight centers with two vertical lines of tape. These lines are important for projector headlights and/or lining up beam cutoff points. Repeat these tape lines for your other headlight.

6. Remove your headlight assembly if necessary, remove the current bulbs, and install your new LED bulbs. Check your owner’s manual for specific instructions on how to replace your headlight bulbs.

7. Depending on your vehicle, you may have to adjust your headlight beam before or after the assembly has been reinstalled. Your owner’s manual will explain how to adjust the beams. Align each headlight so that the top edge of the beam is at the same height as your horizontal line(s). If your headlights can be adjusted horizontally or produce two light cutoff points, use the vertical tape lines to align them properly.

3. Shake the vehicle to ensure that your suspension system is settled. For more precise adjustments, inflate all tires to their designated psi capacity and have someone sit in the driver’s seat. Also, make sure that your vehicle’s gas tank is at least half full.

4. Measure from the ground to the center of your headlight assembly where the bulb is located. This step must be done for all vehicles. If your vehicle allows for horizontal headlight adjustments in addition to vertical adjustments, it’s important that you also measure the distance between the centers of both headlight bulbs. The vehicle featured in this video allows for vertical headlight adjustments only; therefore, center lines aren’t necessary but are shown for demonstration purposes.

5. Turn on your low-beam headlights. Using painter’s tape, mark your headlight measurements on a flat wall. Measure from the ground up, and apply a horizontal line of tape to the wall; this line represents the top of your headlight beam. You can either apply one long, continuous line or small sections where the brightest areas of the headlight beams are shown.

If your vehicle allows for horizontal adjustments, mark the distance between your headlight centers with two vertical lines of tape. These lines are important for projector headlights and/or lining up beam cutoff points.