Under normal circumstances, a circuit breaker lasts for years without ever needing repair or replacement. However, from time to time a circuit breaker will actually “break.” Diagnosing a circuit breaker problem is not a project that an amateur should attempt on his or her own. Only the most skilled do-it-yourselfers can handle this project. Unless you are skilled in electrical safety practices and the proper use of electrical test equipment, contacting an electrician in Los Angeles just makes sense.

If you have a breaker that is tripping regularly, more than likely the breaker is doing its job—the circuit is just overloaded. A skilled electrician Los Angeles can test this by using an ammeter—a tool that is used for testing the amount of electricity going through the circuit. Another problem that occurs regularly is that the breaker will not reset after tripping. In this case, the problem is more likely in the line of electricity rather than the breaker. In most cases the line has a fault and the breaker will (purposely) not reset until the fault is cleared.

When an electrician comes to test your breaker, he will likely first test the voltage at the breaker terminal. Generally, the reading should show 120 VAC. If this appears correctly, he will load the circuit and test again. If voltage drops at this point, there is a good chance the breaker is bad.

Since this is a job that is so in-depth and difficult, calling an electrician from The Electric Connection is highly recommended. These experts have years of experience and training, so they are able to review your problem and determine the best way to proceed. There is no use in taking risks when it comes to your safety and the safety of your home; an experienced electrician is just a phone call away.

Did you know that your video game habit is an energy hog? The costs aren’t limited to the price of your console and games – the Xbox One and other gaming systems actually draw a large amount of electricity. In response to criticism about how much power the Xbox consumes, Microsoft is reaching out to help consumers cut down on their product's energy profile with one small change that could save gamers $250 million per year.

Power-Guzzling Standby Mode

The big problem with the Xbox comes during its standby mode. By design, the system is never actually off, which provides gamers with two major benefits: They can start it up instantly with no load time, and the device downloads updates in the background when the console isn't being used, so you never have to sit around waiting for that annoying status bar to finish loading.

Unfortunately, the “instant-on” feature uses a shocking amount of electricity – up to 40 percent of the total consumed by the Xbox, according to the National Resources Defense Council.

“While the device is reasonably efficient when playing a game, that is more than offset by its power-guzzling ‘Instant On’ standby mode that is enabled by default,” Noah Horowitz wrote on the NRDC blog.

Last year, the NRDC released a study which found that the energy consumed nationwide by the three most popular consoles – PS4, Xbox One and Nintendo's Wii U – reaches as much as 11 billion kilowatt-hours annually, enough to power Houston, Texas for a year.

Microsoft Responds

The criticism must have stung, because Microsoft is now making an extra effort to remind gamers of the console's energy saving mode, which does not have the same features as instant-on but can save consumers $6 to $15 per year. With 7 million consoles and counting in the U.S., that adds up in a big way.

"While we believe Instant-on provides the best experience for our fans, we also believe in providing consumer choice which is why we offered the ‘Energy-saving’ mode," Microsoft wrote in a recent blog post. “By providing multiple power states in Xbox One and empowering our fans with choice, we sought to balance energy efficiency and functionality. At the same time, we know many Xbox One fans are vigilant about their household’s energy consumption; after all, environmental leadership often begins at home.”

The company also previously made changes to reduce power consumption during instant-on mode by one third.

Look for Energy Savings

To change your Xbox so it uses the energy saving option, look in the “power & start up” menu under settings. Fifteen dollars might not sound like a lot, but with so many Xbox fans, the energy savings really add up.

If you really want to go the extra mile with your Xbox and other electronics, just unplug them when you aren't using them. That gets around the matter of stand-by mode altogether and can help you save a decent chunk of change by avoiding energy vampires.

Older homes generally have a character quality that can’t be seen in newer houses. These homes offer great value, and renovation improvements can bring new life into them. Unfortunately often enough the electrical wiring is never inspected during these updates for years at a time. To ensure that all your hard work is going to be safe, look for these common dangers that could threaten your older home.

From the 50s to 70s many homes were built with aluminum wiring. This was used because it was cheaper and more conductive than copper wiring. Unfortunately many pitfalls were found with aluminum wiring after it was used. Overheating and cracking are common problems with aluminum wiring. If your home was built in this time period, have your wires inspected. There could be a number of hazardous points behind your walls that may cause major issues. For more information and hazard signs of aluminum wiring, read our blog article.

Knob and tube wiring was used in homes in the early 1900s and even as early as 50 years ago. It is possible that these homes still contain knob and tube wiring in them. This wiring can be dangerous as it is more likely to crack and result in electrical fires.

The dangers of these two out-dated wiring systems are that they were installed without worry and the problems were not realized until years later. The electrical wiring systems in these homes were left untouched and so did the problems that came with them. Electrical fires, are especially dangerous as the fire starts and spreads quickly and out of sight. By the time the fire is visible it is too late and the damage can be done.

Over the years homes can see additions: new rooms added onto the home, new electrical lines added, hot tubs, etc. If a licenced electrician did not perform these additions there can be a mess of wire connecting the additions to the original home. This problem comes to a head at the service panel. If it is not properly maintained the breaker will trip constantly and electrical outlets will be overloaded. This is very dangerous as the electrical panel is in charge of keeping your home safe from electrical hazards. It is very important that the electrical panel is upgraded in order to provide the correct control of electricity throughout the entire house, old and new. This also means the panel is properly labelled so it is easy to maintain if further updates are being made.

While there is nothing wrong with purchasing an older home, we recommend that a licenced electrician inspect the electrical system in order to identify potential electrical hazards. One of our expert electricians can provide you with a list of items that should be handled. This will help you have peace of mind that your family is safe in their home.

There are a lot of reasons to love your older home.  Whether it’s a part of history or simply more cost effective than buying a brand new home, older homes can be just as nice as a newly built home with the right care.  Unfortunately, that level of care is often overlooked when it comes to licensed Dallas electrician to ensure that your home is as safe as possible.